to_fixed

Discount

Misr Sinai For Supplies

egypt

Egypt

<ul>
<li>Specifications:</li>
<li>Model : RAY98 (P)</li>
<li>Tube Votage : 70 KV ± 10%</li>
<li>Tube Current : 2mA ±20%</li>
<li>Charge input Voltage : 100 V - 240V</li>
<li>Frequency : 50Hz-60Hz</li>
<li>X-Tube : Canon D-045</li>
<li>Anode Angle : 12.5°</li>
<li>Focus : 0.4mm</li>
<li>Exposure time range : 0.04s - 2.0s</li>
<li>Leak Emissivty : 1 meter ≤0.25mGy/h</li>
<li>Machine Weight : 1.7kg</li>
<li>Relative Humidity : 30%RH~75%RH</li>
</ul>

Rundeer Portable X-Ray DC

ENDORAY HF
Technical Data
Class I Electro-medical Apparatus with type-B part applied
Classification
Constant Potential radiographic managed by microprocessor
Head
0.800kW Rated electrical Power
100 KHz High frequency technology
0.7 mm (IEC 336) Focal Spot
6 A Absorption
6cm  Of long cone at the end of spacer ?
2mm AL eq. Total filtration
4-7 mA Selectable anodic current
60-70 KVp Selectable voltage to x-ray tube
 0.25 mGy/h a 1 meter from focus 1 Dispersed radiation
20 mSec-1000 mSec  scala R 10 Exposure time
190-240 V 50/60 Hz Intermittent operation power supply
1/30 1 sec. Exposure 30 sec. reset max Intermittent operation
F.F.20 cm Distance
F 6,3 A T Fuse
wireless Deadman logic control

BMS Endoray DC Mobile X-Ray Machine

<table align="right" border="1" cellpadding="0" cellspacing="0" dir="rtl"><tbody><tr><td style="width:309px;">
			ENDORAY HF
			</td>
			<td style="width:294px;">
			Technical Data
			</td>
		</tr><tr><td style="width:309px;">
			Class I Electro-medical Apparatus with type-B part applied
			</td>
			<td style="width:294px;">
			Classification
			</td>
		</tr><tr><td style="width:309px;">
			Constant Potential radiographic managed by microprocessor
			</td>
			<td style="width:294px;">
			Head
			</td>
		</tr><tr><td style="width:309px;">
			0.800kW
			</td>
			<td style="width:294px;">
			Rated electrical Power
			</td>
		</tr><tr><td style="width:309px;">
			100 KHz
			</td>
			<td style="width:294px;">
			High frequency technology
			</td>
		</tr><tr><td style="width:309px;">
			0.7 mm (IEC 336)
			</td>
			<td style="width:294px;">
			Focal Spot
			</td>
		</tr><tr><td style="width:309px;">
			6 A
			</td>
			<td style="width:294px;">
			Absorption
			</td>
		</tr><tr><td style="width:309px;">
			6cm
			</td>
			<td style="width:294px;">
			&nbsp;Of long cone at the end of spacer&nbsp;?
			</td>
		</tr><tr><td style="width:309px;">
			2mm AL eq.
			</td>
			<td style="width:294px;">
			Total filtration
			</td>
		</tr><tr><td style="width:309px;">
			4-7 mA
			</td>
			<td style="width:294px;">
			Selectable anodic current
			</td>
		</tr><tr><td style="width:309px;">
			60-70 KVp
			</td>
			<td style="width:294px;">
			Selectable voltage to x-ray tube
			</td>
		</tr><tr><td style="width:309px;">
			&nbsp;0.25 mGy/h a 1 meter from focus 1?
			</td>
			<td style="width:294px;">
			Dispersed radiation
			</td>
		</tr><tr><td style="width:309px;">
			20 mSec-1000 mSec&nbsp; scala R 10
			</td>
			<td style="width:294px;">
			Exposure time
			</td>
		</tr><tr><td style="width:309px;">
			190-240 V 50/60 Hz
			</td>
			<td style="width:294px;">
			Intermittent operation power supply
			</td>
		</tr><tr><td style="width:309px;">
			1/30 1 sec. Exposure 30 sec. reset max
			</td>
			<td style="width:294px;">
			Intermittent operation
			</td>
		</tr><tr><td style="width:309px;">
			F.F.20 cm
			</td>
			<td style="width:294px;">
			Distance
			</td>
		</tr><tr><td style="width:309px;">
			F 6,3 A T
			</td>
			<td style="width:294px;">
			Fuse
			</td>
		</tr><tr><td style="width:309px;">
			wireless
			</td>
			<td style="width:294px;">
			Deadman logic control
			<div>&nbsp;</div>
			</td>
		</tr></tbody></table>

BMS | Digital x-ray machine Wall Mounted| Endoray DC. HF W

Specifications:
1- The exclusive thermo switch system gives further safety by blocking&nbsp;Rx emission in the event of a timer break down.
2- Classification: Class I Electro-medical Apparatus with type-B part applied.
3- Head: Self-rectifying single-phase enbloc assembly.
4- Model: AC - KL2 0.8 - 70G.
5- Type 70 Kv.
6- Rated electrical power: 0,430 kW.
7- Supply voltage: 230/240 v (50/60 Hz) single - phase.
8- Absorption 6A.
9- Focal spot: 0,8 mm (IEC 336)
10- Anode current 8 mA.
11- Total filtration: 2mm AL eq.
12- Focus-skin distance 20 cm.
13- ? of beam at end of spacer &lt;6 cm.
14- Dispersed radiation: &lt;0,25 mGy/h at 1 meter from focus.
15- Intermittent operation: 1 s exposure: 60 s reset max.
16- Control logic: WIRELESS Deadman.
17- Maximum apparent resistance of mains power supply: 2 ?.
18- Fuse: Very Fast Acting F 6.3 A
19- Aluminum filter to be interposed between x-ray window and collimator&nbsp; 
20- cone :AL, 1 mm (AIP99,9 UNI3567).

BMS | Digital x-ray machine Mobile | Endoray A.C. R M

Specifications:
1- The exclusive thermo switch system gives further safety by blocking&nbsp;Rx emission in the event of a timer break&nbsp;down.
2- Classification: Class I Electro-medical Apparatus with type-B part applied.
3- Head: Self-rectifying single-phase enbloc assembly.
4- Model: AC - KL2 0.8 - 70G.
5- Type 70 Kv.
6- Rated electrical power: 0,430 kW.
7- Supply voltage: 230/240 v (50/60 Hz) single - phase.
8- Absorption 6A.
9- Focal spot: 0,8 mm (IEC 336)
10- Anode current 8 mA.
11- Total filtration: 2mm AL eq.
12- Focus-skin distance 20 cm.
13- ? of beam at end of spacer &lt;6 cm.
14- Dispersed radiation: &lt;0,25 mGy/h at 1 meter from focus.
15- Intermittent operation: 1 s exposure: 60 s reset max.
16- Control logic: WIRELESS Deadman.
17- Maximum apparent resistance of mains power supply: 2 ?.
18- Fuse: Very Fast Acting F 6.3 A
19- Aluminum filter to be interposed between x-ray window and collimator&nbsp;
20- cone :AL, 1 mm (AIP99,9 UNI3567).

BMS | Digital x-ray machine Wall Mounted | Endoray A.C. W M

<ins>Specifications :</ins>
 
* Mobile x-ray machine (AC).
* Power supply: 220V.AC.
* Rated voltage: 70 kv.
* Tube-head current: 7mA.
* Focal spot: 0.7 mm.
* Radiation Leakage: &lt;0.007mGy/h.
* Beam of light restrict: length 20cm, diameter 6cm.
* Exposure time: 0.01- 3 seconds.
* Digital screen.
* Wired control and wireless remote control.
* Built-in stool

Rundeer X-Ray Machine Mobile

<ins>Specifications :</ins>
 
* Mobile x-ray machine (AC).
* Power supply: 220V.AC.
* Rated voltage: 70 kv.
* Tube-head current: 7mA.
* Focal spot: 0.7 mm.
* Radiation Leakage: &lt;0.007mGy/h.
* Beam of light restrict: length 20cm, diameter 6cm.
* Exposure time: 0.01- 3 seconds.
* Digital screen.
* Wired control and wireless remote control.

Rundeer X-Ray Machine Wall Mounted

TriGroup

<img src="https://dentacarts.com/images/untitled%20folder/Trigroup%20Final21-1024x1024-1000x1000.jpg?1552388815445" alt="undefined" style="height: undefined;width: undefined"/>
Using The International Advanced Technology,Efficient Integrated Design,High Efficiency,Low Radiation. Using Microcomputer Intelligent Control,Not Only Remote Controlled Exposure,But More Powerful Function Of Low Voltage Alarm And High Voltage Protection. Micro Focus Technology,Much More Clear Image And Accurate Diagnosis. The Base Has Two Modes Of Mobile And Fixed ,Pneumatic Lift  Soat Ensures More Convenient For Dentist And More Comfortable For Patient. Can Use Lightroom Dental Film,Imaging In One Minute,Maximum Convenient Dentist To Diagnose. Can Connect To Dental Digital Imaging System,That Is Indispensable For Clinicians To Diagnose And Root Canal Filling.
Specifications
Power Supply:
220V±10%,50HZ,1KVA
Tube Voltage
60KV
Tube Current
8mA
Focus Size
0.8mm 
Total Filtration
2.5mmAL
Exposure Time
0.2-4s
Leak Radiation:
Outside One Meter≦0.002mGy/H，（National Standard:0.25mGy/H）
Package Size:
152*57*26(Cm)
Net Weight:
57kg
Precautions 1. In Order To Ensure Safety In Operation And Use, Good Ground Lead Must Be Installed Well. 2. Because Small X-Ray Machine’s Thermal Capacity Is Limited, Attention Should Be Paid To Making The Machine Work Intermittently. 3. Only During Exposure Process This Machine Will Produce X-Rays. It Won’t Produce X-Rays In Power-Off State, Neither In Power-On State As Long As Not In Exposure. 4. If Any Unforeseen Circumstances Occur During Correct Use, Operators Should Cut Off The Power Immediately And Stop Using The Machine. It Cannot Be Used Again Until It Is Overhauled And Qualified. 5. Before Leaving The Factory, Each X-Ray Device Is Equipped With An Additional Filter Plate With The Following Specifications: 1.0/0.5mm Aluminum Sheets. 6. Every Time When Disassembling The Machine, Disassemble The Head First And Then Other Parts. 8. Every Time After Using The Machine, Recover The Cross Arm To The Highest Point, And Then Place The Machine Head In An Equilibrium Position. 9. Every Time After Using, Sterilize And Clean Beam Tube End That Contacts The Patient With Medical Alcohol. 10. Clean The Machine Surface With A Dry Cloth Every Week And Inspect Whether The Connectors Contact Well. 11. Pay Attention To Machine Maintenance. Check Whether The Indicator Lights, Display, Rotary Knob, Switch, And Remote Control Work Normally; Whether The X-Ray Source Modules Leak Oil; Whether When X-Ray Source Modules Expose Produces Any Abnormal Noise; Or Whether Fixed Screws In The Mechanical Part Loose, And The Like. 13. The Rated Capacity Of The Machine Is 1.1kw. Please Select Power Supply Or Power Grid With A Power Supply Capacity Greater Than 1.5kw. If Network Voltage In This Region Is Abnormal, We Recommend Matching 1.5KW Or Higher Industrial Voltage Stabilizer, To Prevent Damage To The Machine And Reduced Machine Life Due To Abnormal Voltage.

Hainuo X-Ray JYF-10 D AC

Features:
Using the international advanced technology, efficient integrated design, high efficiency, low radiation.
Using microcomputer intelligent control, not only remote controlled exposure, but more powerful function of low voltage alarm and high voltage protection.
Micro focus technology, much more clear image and accurate diagnosis.
The base has two modes of mobile and fixed, pneumatic lift seat ensures more convenient for dentist and more comfortable for patient.
Can use light room dental film, imaging in one minute, maximum convenient dentist to diagnose.
Can connect to dental digital imaging system, that is indispensable for clinicians to diagnose and root canal filling.
 
Specifications:
Power supply: 110/220V, 60/50HZ, 1KVA
Tube voltage: 60KV
Tube current: 8mA
Focus size: 0.4mm
Total filtration: 2.5mmAL
Exposure time: 0.2-4s
Leak radiation: outside one meter≦0.002mGy/h (national standard:0.25mGy/h)
Mounting Type: Wall Mounted Design
Arm Sizes Available: Cross arm 535mm
Oblique arm 2 pcs 632.5 mm
Vertical arm 300 mm
Head length 350 mm
Length of Extension Cone: 2100mm
 
Precautions:
1. In order to ensure safety in operation and use, good ground lead must be installed well.
2. Because small X-ray machine’s thermal capacity is limited, attention should be paid to making the machine work intermittently.
3. Only during exposure process this machine will produce X-rays. It won’t produce X-rays in power-off state, neither in power-on state as long as not in exposure.
4. If any unforeseen circumstances occur during correct use, operators should cut off the power immediately and stop using the machine. It cannot be used again until it is overhauled and qualified.
5. Before leaving the factory, each X-ray device is equipped with an additional filter plate with the following specifications: 1.0/0.5mm aluminum sheets.
6. Every time when disassembling the machine, disassemble the head first and then other parts.
7. Every time after using the machine, recover the cross arm to the highest point, and then place the machine head in an equilibrium position.
8. Every time after using, sterilize and clean beam tube end that contacts the patient with medical alcohol.
9. Clean the machine surface with a dry cloth every week and inspect whether the connectors contact well.
10. Pay attention to machine maintenance. Check whether the indicator lights, display, rotary knob, switch, and remote control work normally; whether the X-ray source modules leak oil; whether when X-ray source modules expose produces any abnormal noise; or whether fixed screws in the mechanical part loose, and the like.
11. The rated capacity of the machine is 1.1kw. Please select power supply or power grid with a power supply capacity greater than 1.5kw. If network voltage in this region is abnormal, we recommend matching 1.5KW or higher industrial voltage stabilizer, to prevent damage to the machine and reduced machine life due to abnormal voltage.
 


<img src="https://dentacarts.com/images/untitled%20folder/Trigroup%20Final22-1024x1024-1000x1000.jpg?1552389610378" alt="undefined" style="height: undefined;width: undefined"/>
Standard Accessories:
1     operation manual and certification  1pc
2     Packing box  1pc
3     Arm components  1pc
4     Central controller  1pc
5     X-ray generator components  1pc
6     Accessories  1pc
6.1   Special spanner  1pc
6.2   Screwdriver(－) M5*75  1pc
6.3   Screwdriver(＋) M6*150  1pc
6.4   Fuse 5A  4pcs
6.5   Power wire/ground wire/exposure switch  1pc each
6.6   Swell screw bolts M10*80  4pcs
6.7   Wrench  1pc

Hainuo X-Ray JYF - 10 D High Frequency DC

Specifications : 
Tube head Canon
* Mobile x-ray machine (DC).
* Power Voltage: 220V
* Frequency: 50/60Hz
* Maximum Power: 1100VA
* Current: 5A
* Fuse: 10A
* Ray Focal Spot :0.4mm
* Bulb Tube Voltage: 65  ±10 &gt;#/p###
* Anode Current: 7mA ±20 &gt;#/p###
* Anode Angle: 12.5º
* Duty Cycle: 1/30
* Half Value Layer: 65kv
* Inherent Filtration: ≥ 2.1mmAl
* Leakage Radiation : 1 meter ≤ 0.14mGy/h
* Time of Exposure: 0.01-2.0s
* Built-in stool.

Rundeer X-Ray Machine Mobile DC

Specifications : 
Tube head Canon
* Mobile x-ray machine (DC).
* Power Voltage: 220V
* Frequency: 50/60Hz
* Maximum Power: 1100VA
* Current: 5A
* Fuse: 10A
* Ray Focal Spot :0.4mm
* Bulb Tube Voltage: 65 ±10 &gt;#/p###
* Anode Current: 7mA ±20 &gt;#/p###
* Anode Angle: 12.5º
* Duty Cycle: 1/30
* Half Value Layer: 65kv
* Inherent Filtration: ≥ 2.1mmAl
* Leakage Radiation : 1 meter ≤ 0.14mGy/h
* Time of Exposure: 0.01-2.0s

Rundeer X-Ray Machine Wall Mounted DC

Innovocare

SMALLER SIZE, BUT WITH UNCHANGED EXCELLENT IMAGE  The compact hand-held design makes you free. Single hand operation. Without the shackle power cord. 
Product Features  A true high frequency chairside X-ray machine, ensures less radiation for the patient &amp; operator.  Compact &amp; single handed operational device.  2mA tube current, combines higher performance and higher definition imaging. Adopt canon micro focus tube with focus 0.4mm. anode angle of 12.5°. Digitalised control machinery provides accuracy &amp; stability. Wide digital display for easy operation. 
Parameters Instruction  Model: RAY98 (P)  Tube Voltage: 70kV±10%
 Tube Current: 2mA±20% 
Charge input Voltage: 100V-240V 
Frequency: 50Hz-60Hz X- 
Tube: CANON D-045 
Anode Angle: 12.5  Focus: 0.4mm  Exposure Time Range: 0.04s -2.0s 
Leak Emissivity: 1 meter 0.25mGy/h
 Machine Weight: 1.7kg 
Relative Humidity: 30%RH-75%RH