B Dent

egypt

Egypt

<h3>Features</h3>
1. The Autoclave is specially designed for the occasions in use of frequent sterilizations. It is equipped with the microprocessor for intelligent control and man-machine interface for convenient operation.
 2. With the distinctions in displaying parameter and condition actively, evaluating malfunction automatically, shutting off for self-protection automatically in case of excessive temperature and pressure, this type autoclave is reliable product in sterilizing. 
3. This product can be applied in sterilizing for the tooth device, operation device, Sanitary Material and other heat-resisting articles existing in the Dept. of Stomatology, Ophthalmology and lab. 
4. Preparation Before Operation:
     I. Before operation, please connect well to the power source.    
     II. Connect the power source hole under the back left side of the autoclave and the power socket by the attached power cable inside the product’s package so as to switch on the autoclave.     
     III. Push down the main power button at the right bottom corner of the front side, when the indicator light is on, it means that the autoclave get through with the shown on the screen.     
     IV. The autoclave is not heated while under such initialization status. 
5. World standard Class-N type. Without Printer.
SUN18-I（N）
Appearance size:445X550X395mm
Inside Dimension:Ø249x355mm
Power: 1800W
Tank Capacity: 18L
Gross Weight: 33kg

Class N autoclaves are compact and they are for sterilizing simple materials. The letter "N" stands for "naked solid products". Buy it now from DentaCarts.

SUN Class N Autoclave 18 Litres

TriGroup

<h3>FEATURES</h3>
1. The Autoclave is specially designed for the occasions in use of frequent sterilizations. It is equipped with the microprocessor for intelligent control and man-machine interface for convenient operation.
 2. With the distinctions in displaying parameter and condition actively, evaluating malfunction automatically, shutting off for self-protection automatically in case of excessive temperature and pressure, this type autoclave is reliable product in sterilizing. 
3. This product can be applied in sterilizing for the tooth device, operation device, Sanitary Material and other heat-resisting articles existing in the Dept. of Stomatology, Ophthalmology and lab. 
4. Preparation Before Operation:
     I. Before operation, please connect well to the power source.    
     II. Connect the power source hole under the back left side of the autoclave and the power socket by the attached power cable                 inside the product’s package so as to switch on the autoclave.     
     III. Push down the main power button at the right bottom corner of the front side, when the indicator light is on, it means that                the autoclave get through with the shown on the screen.     
     IV. The autoclave is not heated while under such initialization status. 
5. World standard Class-N type. Without Printer.

Sky Class N Autoclave - 18L

Sky Class N Autoclave (18 L)

to_fixed

Discount

EL HAWEY CO. For Dental Supplies

<img src="https://dentacarts.com/images/Capture2.PNG?1510580355603" alt="undefined" style="height: undefined;width: undefined"/>
 -The newly-designed model with opening water tank on the top, strictly meets the standard of EN13060, which makes wash and cleaning much more convenient.
It adopts European B standard with 3-times pre-vacuum preceding vacuum drying. Residual humidity is less than 0.2%. Vacuum measurement reaches-0.8bar. It sterilizes and sanitizes miscellaneous packed or unpacked medical instruments, Whether solid or A-type hollow, whether with multi-apertures or inset pipes. It efficiently tides air from every hollow area of any hollow instrument, such as hand-piece, making sure that water steam reaches every corner. Fuzzily computer controlled, digital bright show. The interface is modularized panel for easy operation. It is installed with BOWIE&amp;DICK which measures the penetration of water steam. Mini printer can be attached to record the process of sterilization.
ADVANTAGES: 
-High density air filter,eliminating impurity in air,ensuring the returned air dry and pure. -Efficient double-head vacuum pump,low noise,vacuum ability could get -0.92Bar,double head ensure the balance during working and stable vacuum state in the chamber. -Electronic data output,the sterilization information can be saved into memory disk as a txt file,in connection with computer to analysis,realizing digital sterilization. 
-The multiplex tray holder of sterilizer is single stretching molding,painting and polishing treatment,with good compression bear and suit various load.It could set 5 trays on the holder simultaneously when revolve it 90° -Circular heating little difference in temperature. -Pressure-prevention and corruption-resistance makes it highly reliable. -Alloy heating loop protects against damage by no-water heating. -Spcious cavity makes it easy to clean. -Original fuzzy control system driven by steam generator adoptsPWM(pulse with modulation),able to discriminate the fine differences in temperature allowances and to adjust the modulated waves correspondingly thus making temperature rise at the same speed each time. -Chamber is made of purple glass surface copperplate， plastically metamorphosed by the extrusion under 500-ton oil pressure

Woson Tanda Class B Steam Sterilizer

Misr Sinai For Supplies

Main Features:
The same European autoclave specifications
1- Capacity: 18 L
2- Instrument containers: 3 trays
3- Water supply system : Reservoirs (3.5L fresh water and 5 liter waste water reservoirs)
4- Divided Display LED Screen as following:
<ul>
<li>Bar screen</li>
<li>Temperature screen</li>
<li>Main screen</li>
</ul>
5- Selected button programs:
- 121? program
- 134? program
- B+ program for cotton and gauze and other like materials
6- Sterilization Leakage Test programs:
- Bowie&amp;Dick program
- Leakage program (vacuum test).
7- Dry procedure: vacuum drying
3-programs drying buttons as following:
<ul>
<li>1minute program</li>
<li>5minutes program</li>
<li>10minutes program</li>
</ul>
8- Indicator lamps:
<ul>
<li>Water indicator lamp</li>
<li>Ready indicator lamp</li>
<li>Running indicator lamp</li>
</ul>
9- Package button programs:
<ul>
<li>Wrapped instruments program</li>
<li>Unwrapped instruments program</li>
</ul>
10- Start /stop button
11- Sterilizing record: there is a micro-printer connector (printer optional),
recording the whole process of sterilizing
12- Safety Features: Pressure Release Valve and computerized diagnosing
and alarm system
Technical data:
Voltage: 220V±10%
Power: 2300W/1800W10A

Rundeer Autoclave B18L

Main Features:
The same European autoclave specifications
1- Capacity: 23 L
2- Instrument containers: 3 trays
3- Water supply system : Reservoirs (3.5L fresh water and 5 liter waste water reservoirs)
4- Divided Display LED Screen as following:
<ul>
<li>Bar screen</li>
<li>Temperature screen</li>
<li>Main screen</li>
</ul>
5- Selected button programs:
- 121? program
- 134? program
- B+ program for cotton and gauze and other like materials
6- Sterilization Leakage Test programs:
- Bowie&amp;Dick program
- Leakage program (vacuum test).
7- Dry procedure: vacuum drying
3-programs drying buttons as following:
<ul>
<li>1minute program</li>
<li>5minutes program</li>
<li>10minutes program</li>
</ul>
8- Indicator lamps:
<ul>
<li>Water indicator lamp</li>
<li>Ready indicator lamp</li>
<li>Running indicator lamp</li>
</ul>
9- Package button programs:
<ul>
<li>Wrapped instruments program</li>
<li>Unwrapped instruments program</li>
</ul>
10- Start /stop button
11- Sterilizing record: there is a micro-printer connector (printer optional),
recording the whole process of sterilizing
12- Safety Features: Pressure Release Valve and computerized diagnosing
and alarm system
Technical data:
Voltage: 220V±10%
Power: 2300W/1800W10A

Rundeer Autoclave B23L

Main Features:
1 - Capacity: 12 L
2- Instrument containers: 3 trays
3- Water supply system : Reservoirs (3.5L fresh water and 5 liter waste water reservoirs)
4- Divided Display LED Screen as following:
<ul>
<li>Bar screen</li>
<li>Temperature screen</li>
<li>Main screen</li>
</ul>
5- Selected button programs:
-    121? program
-    134? program
 
6- Dry procedure: vacuum drying
     3-programs drying buttons as following:
<ul>
<li>1minute program</li>
<li>5minutes program</li>
<li>10minutes program</li>
</ul>
 
7- Indicator lamps:
<ul>
<li>Water indicator lamp</li>
<li>Ready indicator lamp</li>
<li>Running indicator lamp</li>
</ul>
8- Start /stop button         
9- Sterilizing record: there is a micro-printer connector (printer optional), 
                                   recording the whole process of sterilizing              
10- Safety Features: Pressure Release Valve and computerized diagnosing
                                 and alarm system
 
 
Technical data:
Voltage: 220V±10%
Power: 2300W/1800W10A
Chamber size : 250mm*355mm

Rundeer Autoclave N12L

DentaCarts

Fully Automatic 8 Preset sterilization programs Ster. Temp.: 105-134℃ Ster. Time: 4-60 min Dry time: 1-25min Vacuum Times: 1-10 times B&amp;D / Helix / Vacuum testing program Cleaning Program Printer &amp; USB Output Big Stainless Steel Water Tanks High quality bacteria filter
User Password
 
Program
121℃ Solid
 121℃ Hollow
 121℃ Porous
 121℃ Solid
 121℃ Hollow
 121℃ Porous
 Vacuum Times
1
3
3
1
3
3
Temp (℃)
121
121
121
134
134
134
Pressure(KPA)
110
110
110
210
210
210
Time(Min.)
20
20
20
4
4
4
 
Program
Cotton
Prion
User defined
 
 
BD/Helix Test
 
 
Vacuum Test
 
 
Clean
Vacuum Times
3
3
User defined
 
 
3
1
3
Temp (℃)
134
134
User defined
 
 
134
/
105
Pressure(KPA)
210
210
User defined
 
 
210
-80
20
Time(Min.)
4
19
User defined
 
 
3.5
15
5
 Warranty:
Two-years warranty for whole machine Lifetime warranty for chamber Lifetime maintenance   Standard packing Q'ty (PCS) Autoclave 1 Power cable 1 Water drain pipe 1 Tray 3 Tray holder 1 Handle for tray holder 1 Fuse 2
Instruction manual 1
 
  The working condition of the autoclave: *         Relative humidity: ≤80%         Atmospheric pressure: &gt;70kPa; *         Voltage:230VAC, 50Hz, 2500VA *         The highest working pressure:  0.21～0.23MPa *         The highest working temperature: 134～137℃   The requirements of transportation and storage: *          Environmental temperature range: 5~40℃ *          Relative humidity: ≤80&gt;   No corroding gases   Warning: *          Please use a 3-hole socket, and ensure the socket has been connected well with the ground. Do not put the autoclave on a place that the power are difficult to be cut off. *          Do not use power with different voltage with which stated in this manual. *          Do not touch the plug or socket with wet hands. *          Do not pull, change, over-bend or twist the wires, and do not put heavy things on the wires. *          Do not put the autoclave on an unstable table. *          Do not block the door of autoclave, and cover the ventilation holes and radiation holes. *          Do not put anything on the top of autoclave. *          If you find any abnormal smell or sound during operation, please cut off the power immediately and contact your local distributor or us.

Lafomed Class B Autoclave 23L

Overview： 
ICANCLAVE D are benchtop steam sterilizers with Class B pre & post vacuum type, complies with the European standard EN13060. These autoclaves require minimal bench space making it an idea sterilization solution for small clinic such as dental, veterinary, beauty, podiatry and microbiology requirement. Pre & post vacuum tabletop “Class B” autoclave, with chamber size 18 liters. Electronical safety door locking included, external printer available. They are durable automatically autoclaves which are easy and quick to use.
Excellent Performance:
<ul><li>Full automatic table top autoclave with pre-set programs.</li><li>Complies with European standard EN13060.</li><li>Working very quietly.</li><li>In built independent rapid steam generator ensures quick sterilization cycles.</li><li>Rapid post sterilization vacuum drying.</li><li>With one flash water tank and used one water tank.</li><li>LCD screen displaying time, temperature and pressure, process alert and instrument conditions.</li><li>User friendly interface.</li><li>Self-initialization when work in different altitude.</li><li>Multilanguage menu: Chinese, English, Spanish, German, Lithuanian, Polish, French, Czech, Hungarian, Romanian, Dutch, Latvian, Italian, Portuguese, Russian, Coratian.</li></ul>
Safety and Monitoring:
<ul><li>Double safety protection system prevents the cycle from starting if the door is not correctly locked. This system also prevents the door from opening if the pressure inside the chamber is not equal to atmospheric pressure outside the chamber.</li><li>Pressure safety valve prevents over pressure in the chamber and steam generator.</li><li>The power is automatically cut if a short circuit or electrical fault occurs.</li><li>Able to detect and identify the exact cause of any problem, and to issue a specific error code to the operator.</li><li>Water level main switch in the main tank controlling the min and max water level.</li><li>Automatic warning for maintenance.</li></ul>
Documentation:
<ul><li>Printer (option): an external printer is optional for all “icanclave”D autoclaves.</li><li>USB port: it is used for connecting a USB sticker, all sterilization data are automatically written in the USB stick, and can be ready directly in any PC and stored electronically.</li><li>Internal Memory: the last 20 cycles can be automatically stored in the autoclave system, which can be printed out at any time.</li></ul>
Additional information:
<figure><img src="https://d1x0v0tfzzbggv.cloudfront.net/images/abt__ut2/18.PNG?1593097991449"></figure>
Cycles:
<img src="https://d1x0v0tfzzbggv.cloudfront.net/images/abt__ut2/sacb.PNG?1593098155056"> 
Standards:
97/23/EEC Directive on Pressure Equipment.
EN 13060 Small Steam Sterilizers.
93/42/EEC Directive on Medical Devices.
EN 61326, EN 61000 Electromagnetic Compatibility. 
EN 61010-1, UL 61010-1Safety requirements. 
EN 61010-2-040, IEC 61010-2-040. Specific requirements for steam sterilizers used for treatment of medical materials.

ICANCLAVE D Autoclave CLASS B

Global Trade

<ul>
<li>This autoclave have digital printer. Based on the new class B of international EN13060, have 3 pulsating vacuum. Vacuum up to -0.9Bar (-0.09Mpa). Suitable to sterilizing wrap, unwrap, solid, porous, hollow device.</li>
<li>Use imported &amp; advanced 16-bit microprocessor, easy to operate. Most suitable for the Dept Lab. With BD test and vacuum test procedures</li>
<li>The jet type of steam generator, ensure the efficient sterilizing. With alarm system for waste water tank, avoid the waste water to enter into the sterilizing circulation, make the sterilizing completely.</li>
<li>Precise digital display and advanced self-test system ensure you get the working data freely.</li>
<li>Double lock door for safety during operating. Optional inbuilt mini-printer or USB connector to record the process of sterilizing.</li>
</ul>
Specifications Rated Voltage: 220V±22V, 50Hz±1Hz, 110V±11V, 60Hz±1Hz Rated Power: 2000W Sterilizing (Pressure/temp.): 0.9-1.3bar/120oC, 2.0-2.3bar/120oC (Both of above are Under Standard Atmospheric pressure) Fuse-Melting pipe: T15A / T30A Capacity: 23Liters Water Consumption volume per recycling round: 0.3L Working programs: 4 Vacuum: three times pre-vacuum Operating Temp: 0-40oC Inside dimensions: ф245*465mm Outside dimensions(23L):445*640*395mm package dimensions:740*550*500mm Net Weight: 51kg Gross weight: 53kg

The Autoclave is specially designed for the occasions in use of frequent sterilizations. Buy it now from DentaCarts.

SUN Class B Autoclave 23 Litres PLUS Built-In Printer PLUS Spare Rubber Door Seal

SUN Class B Autoclave 23 Litres + Built-In Printer + Spare Rubber Door Seal

BMS STERIL MAXIMUM has been designed and manufactured according to EN13060.
It has a built-in vaporizer, which generates overall energy savings thanks to more rapid cycles and consequent drastic reduction in water and energy consumption.
Stainless-steel chamber.
The large graphic display, together with a complete management
and control software, make the autoclave extremely user-friendly:
each single operation is guided step by step and may be dispayed in 10 different languages which can be selected and set up through the user menu.
It has a built-in printer, an electrical door lock and internal connection settings for water purification system.
The MTS (Memory Test System) is a technical backup which has been developped to assist the user with more reliable and faster diagnosis, reducing as a consequence the management costs. Each cycle can be treated as night cycle.
BMS STERIL MAXIMUM is a class B autoclave with 10 different sterilization cycles and 2 test cycles (Vacuum Test and Helix/ Bowie&amp;Dick Test). It is possible to select both type-B cycles (6, with fractioned vacuum) and type-S cycles (4, with pre and post vacuum), according to the type of material to be sterilized.
<img src="https://dentacarts.com/images/companies/9/BMS%20autoclave%20spec.png?1494511911530" alt="undefined" style="height: undefined;width: undefined"/>

BMS Autoclave Steril Maximum B18L

The All-New Autoclave Touch screen 
<ul>
<li>B-Class Autoclave</li>
<li>Touch screen: - Elegant design</li>
</ul>
                - Easy operation 
<ul>
<li>Suitable for different types of instruments</li>
<li>Double lock system: Mechanical lock with air-lock system </li>
<li>Big capacity open water tank with built-in water quality sensor</li>
</ul>
Power: 230V/50Hz Wattage: 1800W/2000W Capacity: 18L Chamber Size: Φ249X355mm/Φ249X450mm Package: 890X580X550mm&nbsp;

he All-New Autoclave Touch screen

B-Class Autoclave
Touch screen: - Elegant design
                - Easy operation 

Suitable for different types of instruments
Double lock system: Mechanical lock with air-lock system 
Big capacity open water ta

Rundeer Touch Screen Autoclave 18L

<ul>
<li>This autoclave have digital printer.,Based on the new class B of international EN13060, have 3 pulsating vacuum. Vacuum up to -0.9Bar (-0.09Mpa). Suitable to sterilizing wrap, unwrap, solid, porous, hollow device.</li>
<li>Use imported &amp; advanced 16-bit microprocessor, easy to operate. Most suitable for the Dept Lab. With BD test and vacuum test procedures</li>
<li>The jet type of steam generator, ensure the efficient sterilizing. With alarm system for waste water tank, avoid the waste water to enter into the sterilizing circulation, make the sterilizing completely.</li>
<li>Precise digital display and advanced self-test system ensure you get the working data freely.</li>
<li>Double lock door for safety during operating. Optional inbuilt mini-printer or USB connector to record the process of sterilizing.</li>
</ul>
Specifications: Rated Voltage: 220V±22V, 50Hz±1Hz, 110V±11V, 60Hz±1Hz Rated Power: 1800W Sterilizing (Pressure/temp.): 0.9-1.3bar/120oC, 2.0-2.3bar/120oC (Both of above are Under Standard Atmospheric pressure) Fuse-Melting pipe: T15A / T30A Capacity: 18Liters Water Consumption volume per recycling round: 0.3L Working programs: 4 Vacuum: three times pre-vacuum Operating Temp: 0-40oC Inside dimensions: 245mmX355mm Outside dimensions(18L):445*550*395mm package dimensions:670*550*500mm Net Weight: 46kg Gross weight: 48kg