equipment_5

to_fixed

Discount

Kandil

egypt

Egypt

<h5>Features:</h5>
<ul>
<li>Wireless</li>
<li>Light meter attached</li>
<li>Built in fan to avoid over-heat</li>
<li>OLED screen. All angles visible</li>
<li>Especially suitable to solidify agglomerant of orthodontic bracket, veneer and post</li>
</ul>
<h5>Technical Information:</h5>
<ul>
<li>Power voltage: AC100-240 V/50-60Hz</li>
<li>Light power: 1600-1800mW/cm²</li>
<li>Weight: 210g</li>
<li>Dimensions: 195*40*150mm</li>
</ul>

Woodpecker Light Curing LED F

Woodpecker Light Curing RTA: 1000-1200 Watt - The Solidification Effect Is Not Affected By The Consumption Of Remaining Power .- Special Light Hood And Holder Design With High Efficiency In Filtering Light. - Ergonomic Design , Small And Convinient.

Woodpecker RTA Curing Light

WOODPECKER i-LED Plus Curing Light from Woodpecker isergonomically designed to fit comfortably in the user’s hand. Using a constant power output this light has a cure time of 1 second for 2mm of resin, with a light intensity of up to 2300mw/ cm?.After the new upgrade, the wave band changes of iLED changes from a single blue light to blue-violet light which can cure all materials.
ADVANTAGES :-
Upgraded light intensity
<ul>
<li>Two modes for option:With the maximum light intensity of 2300mw/cm2,Curing 2mm resin in 1s,Which makes it especially suitable for orthodontic brackets, porcelain veneers and post core adhesives.</li>
</ul>
Upgraded focused light output
<ul>
<li>Unique woodpecker technology of focused light output reduces 55.87% light angle, allowing more concentrated energy and higher curing efficiency.</li>
</ul>
Upgraded wide spectrum
<ul>
<li>The emission wavelength range of iLED plus wide spectrum, curing light is 385nm-515nm, mainly adding the wave band of 385nm-420nm.the additional band can better curing the resin materials containing new- style photo initiators such as TPO.For example, restoration materials such as Tetric N-ceram bulk fill (Ivoclar) &amp; Amelogen plus (Ultradent).The additional wave band can also reduce the risk of resin shedding and incomplete curing.</li>
</ul>
Features :-
<ul>
<li>Constant power output- born for teeth restoration</li>
<li>360 Degree curing- reach every angle</li>
<li>Fluid design- better hand feeling</li>
<li>1 sec for curing- 2mm resin</li>
<li>Wide spectrum</li>
<li>High light intensity</li>
<li>Focused light</li>
</ul>
TECHNICAL SPECIFICATIONS :-
<ul>
<li>Dimensions: 25mm?25mm?240mm</li>
<li>Net weight: 278g</li>
<li>Power Input: 100V to 240V, 50Hz/60 Hz</li>
<li>Wave length: 385nm-515nm</li>
<li>Light intensity: 1000 mW/cm2~2500mW/cm2</li>
</ul>
PRECAUTIONS :-
<ul>
<li>Please recharge the battery at least 4 hours before first time usage.</li>
<li>In order to prevent cross-infection, it is forbidden to reuse the disposable sleeve.</li>
<li>The top of the main unit can be turned 360 degrees to both left and right while it is forbidden to remove.</li>
<li>During operation, the blue light should be aimed straightly at the composite resin to ensure the effect of solidification.</li>
<li>Avoid aiming the blue light at eyes directly.</li>
<li>Please use the power adapter and lithium battery which is designed and supplied by our company. It may cause potential dangers to operator and patient by using the power adapter and lithium battery which is designed and supplied by other manufacturers.</li>
<li>It is forbidden to use metal or other conductors to touch the main unit and the charging point of pedestal because it may burn the internal circuit or make the lithium battery short circuit.</li>
<li>Please recharge the battery in cool and ventilated room.</li>
<li>It is forbidden to self-taking apart the battery, in order not to result in short-circuit or leakage.</li>
<li>It is forbidden to extrude, shake or rock the battery. The Li-ion battery is forbidden to be in short-circuit situation and it is forbidden to put the</li>
</ul>
MAINTENANCE:-
<ul>
<li>This equipment does not include the self-maintainable spare parts. The maintenance of this equipment should be taken by the appointed professional or special repair shop.</li>
<li>Users can change the disposable sleeve and lithium battery. Please use accessory which is designed and supplied by our company, contract with the local dealer or our company if you want to buy. It may cause potential dangers to curing light or other damages which is designed and supplied by other manufacturers.</li>
<li>The accessory of the product should be cleaned by clean water or neutral sterilized liquid. Do not soak. Do not use highly volatile and diffluent solvent to clean this equipment, which can cause the signs on the control panel to fade.</li>
<li>Please clean the resin remained on the top of the main unit after using to avoid infecting the life-span or solidified effect.</li>
<li>The device cannot be maintanenced during operation. And it is suggested to maintain it once a month. But sleeve is for one-time usage and no need for maintanance.</li>
</ul>
Packaging :-
<ul>
<li>1 x Light cure unit</li>
<li>1 x Charger</li>
<li>1 x Charger cord</li>
<li>1 x Instruction manual </li>
</ul>

Super capacity Li-ion battery, full charge can be used more than 400 times under 10s working time mode. wavelength (420nm~480nm) , 1 second for 2mm in, intensity up to 2300mw/ cm².shop now from DC

Woodpecker Light Cure I Led

Denta Carts

Features:
<ul>
<li>Smart controlling chip</li>
<li>keeps light output consistent</li>
<li>Light intensity:</li>
<li>1000mw/cm 2 , 1500mw/cm 2 , 2300mw/cm 2</li>
<li>600 mw/cm ²(detect mode)</li>
<li>Wavelength:385-515nm</li>
<li>3 Blue, 1 Violet, 10w LED</li>
<li>360° rotatable head</li>
<li>Intensity digital display</li>
<li>Multiple Curing Options:</li>
<li>   Ramp mode</li>
<li>   Pulse mode</li>
<li>Caries detection</li>
</ul>
Technical parameter: Curing Pen 4 LEDs curing light Dimension: 24*21*230(mm) Net Weight: 109g Lens size: 11mm Power supply: &gt;1200 times, 3 Sec Maximum light intensity

Eighteeth Curing Pen

TriGroup

Standard specifications:
-Wave length 385~515nm -Power input: 100-240VAC 50Hz/60Hz -Power output: DC 5V/1A -Battery: 2600mAh, can be used over 1300 times under 10 sec mode -Two modes optional: ①Turbo mode: P1: 2300- 2500mW/cm2, 1s, 3s ②Normal mode: P2: 1000- 1200mW/cm2, 5s, 10s, 15s, 20s – Color: Black



Standard specifications:
-Wave length 385~515nm
-Power input: 100-240VAC 50Hz/60Hz
-Power output: DC 5V/1A
-Battery: 2600mAh, can be used over
1300 times under 10 sec mode
-Two modes optional:
①Turbo mode: P1: 2300-
2500mW/cm2, 1s, 3s
②Normal

Maxcure 7 Lightcure

Misr Sinai For Supplies

Technical Data:
<ul>
<li>Adapter：AC100~240V，DC5V/1.5A，50/60Hz</li>
<li>Curing mode:</li>
<li>Wavelength: 380~520nm;</li>
<li>Curing time: 10s, 20s;</li>
<li>Curing depth: 8mm;</li>
<li>Curing range: 10mm;</li>
<li>Light power:≥1100mw/cm²</li>
</ul>
 
Detection mode:
<ul>
<li>Wavelength: 380~420nm</li>
<li>Light intensity: 40~280mw/cm</li>
</ul>
DB686 Nano
●The full metal body;
●Small and exquisite, only 13.5mm outside diameter;
●Indicator light and control key, two in one;
●Head can rotate 360°;
●4 wick, wide spectrum:380-520mm, suitable for most of UV curing resins;
●Independent caries detection LED light core, leaving no place for caries to hide;
●Built-in high sensitive LED metering system;
●10mm wide curing range;
●8mm curing depth；
●Two batteries as standard, a fully charged battery can be used 200 times(10s curing mode)

COXO DB 686 Nano Light Cure and Caries Detector DB Nano

<h1>Woodpecker iLED Max Light Cure</h1>
The woodpecker iLED MAX. More-focused light output.
Upgraded focused light output Unique Woodpecker technology of focused light output reduces 55.87% light angle, allowing more concentrated energy and higher curing efficiency.
Upgraded light intensity Two modes for options; with the maximum light intensity of 2300mw/cm², curing 2 mm resin in 1s, which makes it especially suitable for orthodontic brackets, porcelain veneers and post-core adhesives.
Upgraded wide spectrum The emissions wavelength range of iLED Max Wide Spectrum Curing Light is 385mm-420nm. The additional band can better curing the resin materials containing new-style photoinitiators such as TPO. For example, restoration materials such as Tetric N-Ceram Bulk Fill (Ivoclar), Amelogen Plus (Ultradent), and ENA Hn(Micerium). The additional wave band can also reduce the risk of resin shedding and incomplete curing.
Using a constant power output this light has two program settings:
<ul>
<li>P1 - Turbo Mode - Light intensity 2300 - 2500 mw/cm2 for 1 - 3 second cures.</li>
<li>P2 - Normal Mode - Light intensity 1000 - 1200mw/cm2 for 5 - 20 second cures.</li>
<li>With the Turbo mode the light has a cure time of 1 second for 2mm of resin, with light intensity of up to 2300mw/ cm²</li>
</ul>
It also features:
<ul>
<li>a 360° fully rotatable head, disposable covers and a rechargeable lithium battery.</li>
<li>Constant Power Output</li>
<li>360° Curing</li>
<li>Fluid Design</li>
<li>1 sec. for Curing</li>
</ul>
Technical specifications:
<ul>
<li>Dimensions: 25mm×25mm×240mm</li>
<li>Net weight: 278g</li>
<li>Power Input: 100V to 240V, 50Hz/60 Hz</li>
<li>Wave length: 385nm-515nm</li>
<li>Light intensity: 1000 mW/cm2~2500mW/cm2</li>
</ul>

Woodpecker iLED Max Light Cure

Professional Curing Lamp. 
The Set, which is meant for built-in application, has got the following features:
<ul>
<li>SIX curing programs</li>
<li>High-power LED light</li>
<li>Straight or Pistol position</li>
<li>Grey or brown supply silicone Hose.</li>
</ul>
Lamp comes with a @8mm optical fibre and 2-year guarantee.
A @5mm optical fibre is also available for higher output power.
AVAILABLE VERSIONS:
<ul>
<li>With grey silicone hose (REF 502.93)</li>
<li>With brown silicone hose (REF 502.97)</li>
</ul>
Technical Sheet :
<ul>
<li>Sterilization Optical fiber and Shield can be sterilized in an autoclave at 134 °C/2 bar (275 °F/29 psi).</li>
<li>Compliance CEI EN 60601-1, CEI EN 62471</li>
<li>Weight 120 g</li>
<li>Supply Voltage 20 ÷ 36 Vdc; 24 Vac</li>
</ul>

TKD MOON EVOLUTION Italy Light Cure Built in

Features: ✔ Lightning fast, curing in one second. ✔ Choose between two modes. Super mode: 1 second curing, 3 seconds curing; Progressive mode: 5 seconds, 10 seconds, 15 seconds, 20 seconds ✔ 360 ° rotating irradiation is meticulous. ✔ The high end makes the light source specially designed for tooth restoration. ✔ Constant optical power output, without affecting the curing effect due to the decrease of battery power.
Technical Specification:
Light power 5W
Wavelength 430-485nm
Light intensity 1200mW/cm2-1600mW/cm2
Battery Li-on
Battery capacity 1100mAh
Input voltage AC100-240V, 50/60Hz 0.4A Max
Output voltage DC 5V/1.5A
Net Weight 190g
Material stainless steel
Dimensions 22x15.5x9cm

Cicada One Second Curing Light Cure Plastic

-  Ultra Power Mode: 3000mw/cm2 
- Broad spectrum wavelength : ranges from 380nm - 515nm.
- 360 rotatable , small light head: Easy to access to posterior molars which offers better patient’s experience.
- Special lens design : Unique lens design forms a concentrated beam for uniform curing. 
5 working modes: 
P1: 
normal mode 
Light Intensity: 1200mw/cm2.
Time Setting:5s, 10s, 15s, 20s, 25s,30s,35s,40s.
P2: 
High mode
Light Intensity: 2000mw/cm2.
Time Setting: 1s, 3s, 5s, 10s. 
P3: 
Ultra mode 
Light Intensity:3000mw/cm2
Time Setting: 1s, 3s, 5s.
P4:
Pluse mode
Light Intensity: 1200mw/cm2
Time Setting:5s, 10s, 15s, 20s.
P5:
Ramp mode
( Reduces Composite Micro-cracking ) 
Light Intensity: 1200mw/cm2
Time Setting:5s, 10s, 15s, 20s.

Eighteeth Curing Pen-E 1 sec

Model: MaxCure3
Power Input: 100-240VAC, 50Hz/60Hz
Power Output: 5V DC/1A
Wave Length: 430 nm-480 nm

Light Intensity: 1000-1200mW/cm²
Battery: 800 mA&nbsp;

Refine MaxCure3 Curing Light

lz medical

Hepatolux light cure. Characteristics: - Reduce resin shrinkage, lower the risk of microleakage and secondary caries, and alleviate post-operative sensitivity for patients. - Enhances the degree of polymerisation, making restorations harder and more wear-resistant. - Features powerful penetration capabilities; curing depth of up to 8.6 mm. Compact yet powerful: - Full metal body. - Ergonomic streamlined design. - Lightweight and sturdy, impact-resistant and durable. 14.8° Focusing angle: - The focusing angle is only 14.8°, ensuring a more concentrated light beam. - This ensures better curing effects in the deeper layer. The light intensity attenuation loss is minimal: - Compared to other light-curing units, HeptaLux exhibits less light intensity attenuation. The maximum light intensity reaches 3200: - With a 10W LED core, the light output energy is stronger, and the emission angle is reduced. - This achieves a maximum light intensity of 3200 mW/cm², ensuring sufficient curing depth and shortening the required time. - Resin curing efficiency is thereby enhanced. Light intensity measurement: - The base allows for light intensity measurement at any time. - Ensuring accurate light intensity for efficient resin Polymerization. - Providing a comfortable treatment experience for both you and the patient. Simplified dual-button operation: - Equipped with a TFT color screen that clearly displays modes, time, and battery level, enhancing clinical efficacy. Technical specifications: - Light intensity: 3000 mW/cm2. - Wavelength: 385-850 nm. - Modes: Normal Mode, High Mode, Trubo Mode, Ortho Mode, Soft Mode, Pulse Mode, Check Mode, Transillumination Mode. - Battery: 2000 mAh. - Display: TFT color display. - Apex locator: Built-in apex locator&nbsp;