Dental Smile.

egypt

Egypt

Its use is quite easy
<ul><li>Fix the shape of the tooth to be prepared, with a composite.</li><li>Print using putty and print spoons.</li><li>Do the preparation as usual.</li><li>Apply CharmTemp Crown directly to the putty mold, insert it back to the prepared tooth. Wait 2 minutes.</li><li>Remove the Putty print. Cut excess material on the margin.</li><li>Perform polishing as usual. Usually at least because the temporary is aesthetic.</li><li>Inserted into gear using temporary cement.</li></ul>

Apply CharmTemp Crown directly to the putty mold, insert it back to the prepared tooth. Wait 2 minutes. Buy it now from DentaCarts.

DENTKIST CHARM TEMP CROWN

B Dent

SHINHUNG - Korea
 
OPTIMALLY – THE PERFECT ALLOY FOR PAEDIATRIC CROWNS: 
<ul class="promolist"><li>Kids Crowns are made from Optimalloy, which is the result of years of collaborative research between Shinhung and Department of Paediatric Dentistry of Seoul University, Korea</li><li>Optimalloy is a stainless steel alloy that was specifically created to have extraordinary metallurgical properties that are ideal for use in paediatric patients</li></ul>
 PERFECT SIZE AND SHAPE: 
<ul class="promolist"><li>Kids Crowns are about 1.5 mm shorter than the competition. Thanks to these optimum dimensions, arrived at after significant research, Kids Crowns require less trimming, contouring and crimping</li><li>Kids Crowns save precious time owing to their pre-festooning in the gingival area</li></ul>
 STRONG WHERE NECESSARY, SUPPLE WHERE NEEDED: 
<ul class="promolist"><li>Kids Crowns are built to last with their strong occlusal surfaces that resist abrasion and perforation</li><li>Pliable cervical areas make contouring and crimping easy</li></ul>
 EXTRAORDINARY BIOCOMPATIBILITY: 
<ul class="promolist"><li>The accurate anatomy and high surface gloss prevent food accumulation</li><li>Kids Crowns have low nickel content compared to the competition. Along with their bio-identical ceramic coating, they make an incredibly biocompatible restoration</li></ul>
There are six possible sizes for each deciduous molar providing a wide degree of choice to the clinician when it comes to selecting the appropriate restoration. Here is a chart demonstrating the different sizes:

<img src="https://d1x0v0tfzzbggv.cloudfront.net/images/companies/61/crownsnap.jpg?1562265962297">

<ul><li>Intro Kit:&nbsp;1 crown of each size (Total 48 crowns)</li></ul>

Kids Stainless Steel Crowns Kit (48pcs)

to_fixed

Discount

Wide variety of diamond burs with a code indicating the shape of the bur.

Mani TR-14 D.S

Elite-Dentist

G&Z INSTRUMENTE offers a variety of stones and burs that make all dental treatments possible. -Long Lifetime -Excellent Concentricity&nbsp;

G&Z INSTRUMENTE offers a variety of stones and burs that make all dental treatments possible.
-Long Lifetime
-Excellent Concentricity 
 Comes in sheet of 5 burs/stones 

G&Z INSTRUMENTS Bur - Green Color Coded

Mani si-47sc inverted Diamond Stone

Mani SI-47SC inverted Diamond Stone

For over 45 years, 3M ESPE has been leading the way in the field of dental impressioning. Now the innovative Retraction Capsule sets another milestone: it is a simple and effective means of gingival retraction.
<ul>
<li>Easy sulcus access and effective opening due to the capsule’s fine tip</li>
<li>Effective gingival deflection, clean and dry sulcus area, plus lasting and robust haemostasis</li>
<li>Convenient and time-saving procedure: 50% faster than using cords</li>
</ul>

For over 45 years, 3M ESPE has been leading the way in the field of dental impressioning. Buy now from DentaCarts.

3M Astringent Retraction Paste Value Capsule

3M Astringent Retraction Paste Value (1 Capsule)

<a href="https://www.sdi.com.au/au/product/riva-luting/" target="_blank"><img src="https://dentacarts.com/images/companies/61/000%20official-site.jpg?1661634876945"></a>
<h3>Glass ionomer luting cement with fabulous fluoride release</h3>
Riva Luting is a conventional, self curing, glass ionomer luting cement designed for final cementation of metal based restorations. It chemically bonds to metal substrates and the tooth.
<figure><img width="310" height="272" src="https://www.sdi.com.au/wp-content/uploads/2017/01/rivaluting1_en_a.jpg" class="vc_single_image-img attachment-full lazyloaded" sizes="(max-width: 310px) 85vw, 310px" srcset="https://www.sdi.com.au/wp-content/uploads/2017/01/rivaluting1_en_a.jpg 310w, https://www.sdi.com.au/wp-content/uploads/2017/01/rivaluting1_en_a-300x263.jpg 300w" data-ll-status="loaded" style="vertical-align: top;">
</figure>
<h3>Proprietary&nbsp;ionglassTM&nbsp;filler technology</h3>
Riva Luting utilises SDI’s proprietary&nbsp;ionglass&trade; filler developed by our glass technologists.&nbsp;ionglass&trade; is a radiopaque, high ion releasing, reactive glass used in SDI’s range of dental cements. Riva Luting releases substantially higher fluoride to assist with remineralization of the natural dentition.
<h3>Proven antimicrobial effect</h3>
Compared to other materials such as fluoride releasing resin cements, Riva Luting has proven antimicrobial activity against three cariogenic bacteria: Streptococcus mutans, Streptococcus sobrinus and Lactobacillus(2).
<h3>One simple colour</h3>
Riva Luting is available in a universal light yellow shade.
High flexural strength
High flexural strength enhances longevity of a glass ionomer luting cement by withstanding mastication forces. Riva Luting’s high flexural strength increases its durability in the oral environment and long term ability to retain indirect restorations.
<figure><img width="278" height="155" src="https://www.sdi.com.au/wp-content/uploads/2017/01/rivaluting5_en.jpg" class="vc_single_image-img attachment-full lazyloaded" data-ll-status="loaded" style="vertical-align: top;">
</figure>

<figure><img width="268" height="162" src="https://www.sdi.com.au/wp-content/uploads/2017/01/rivaluting6_en.jpg" class="vc_single_image-img attachment-full lazyloaded" data-ll-status="loaded" style="vertical-align: top;">
</figure>

High fluoride release
Riva Luting’s free movement of fluoride provides benefits to the tooth. Fluoride plays several significant roles in any caries – prevention program. These include the formation of fluorapatite, which is more acid resistant than hydroxyapatite. Fluorapatite is very important for tooth remineralization.
<figure><img width="313" height="252" src="https://www.sdi.com.au/wp-content/uploads/2017/01/rivaluting2_en.jpg" class="vc_single_image-img attachment-full lazyloaded" sizes="(max-width: 313px) 85vw, 313px" srcset="https://www.sdi.com.au/wp-content/uploads/2017/01/rivaluting2_en.jpg 313w, https://www.sdi.com.au/wp-content/uploads/2017/01/rivaluting2_en-300x242.jpg 300w" data-ll-status="loaded" style="vertical-align: top;">
</figure>
Low solubility
Riva Luting has low solubility in the oral environment. This increases the material’s ability to resist disintegration and wear caused by oral acidity.
<figure><img width="279" height="156" src="https://www.sdi.com.au/wp-content/uploads/2017/01/rivaluting3_en.jpg" class="vc_single_image-img attachment-full lazyloaded" data-ll-status="loaded" style="vertical-align: top;">
</figure>

Setting times
There will be minimal loss of working time when using Riva Luting. With adequate working time and a quick setting property, Riva Luting will shorten chair time and ensures early resistance.
<figure><img width="274" height="173" src="https://www.sdi.com.au/wp-content/uploads/2017/01/rivaluting4_en.jpg" class="vc_single_image-img attachment-full lazyloaded" data-ll-status="loaded" style="vertical-align: top;">
</figure>
Very low film thickness
Riva Luting quickly flows into the preparation. A low film thickness allows the seating of tight fitting indirect restorations.
<figure><img width="269" height="156" src="https://www.sdi.com.au/wp-content/uploads/2017/01/rivaluting7_en.jpg" class="vc_single_image-img attachment-full lazyloaded" data-ll-status="loaded" style="vertical-align: top;">
</figure>
<h3>Indications</h3>
<ul><li>Cementation of metal or porcelain fused to metal inlays, onlays and crowns</li><li>Cementation of stainless steel crowns</li><li>Cementation of posts and screws</li><li>Attachment of metal orthodontic bands</li><li>Lining</li></ul>

* GC Fuji I is the trademark of GC Corporation not of SDI Limited.
Ketac&trade; Cem is the trademark of 3M or 3M ESPE AG not of SDI Limited.
** Published and SDI Test Data.
(1) McCabe JF, Al-Naimi OT. Fluoride release into water for the
Riva GIC products compared with competitor products. University
of Newcastle (UK); February 2005 .
(2) Waldo B, Zhang P, Bennett J, Michalek SM, Katz J, Broome JC. Antimicrobial Activity of Composite-Resin and Glass-Ionomer Cements. University of Alabama at Birmingham, School of Dentistry, USA. (3) The Dental Advisor. Volume 23, No.2, March 2006

SDI Riva Luting Glass Ionomer Cement Capsule

United

Fiber Post Drills ( Nordin Dent)&nbsp;

Nordin Fiber Post Drill

<img src="https://d1x0v0tfzzbggv.cloudfront.net/images/blog/q.PNG?1577884325185">

 
■Color Coding: Color code indication is provided at the end of working part ( ), according to the size of diamond grit conforming to the specification.
 

■Classification: MANI coding system reflects shapes of burs. The contour and sizes could be imagined by MANI nomenclature since ISO numbers are also indicated. ●TF/Taper Flat End ●TR/Taper Round End ●TC/Taper Conical End ●FO/Flame Ogival End ●SF/Straight Flat End ●SO/Straight Ogival End ●SR/Straight Round End ●RS/Rounded Shoulder ●EX/Special (Extra) Shape ●BR/Ball Round Type ●BC/Ball Collar Type ●DI/Double Inverted Cone ●SI/Single Inverted Cone ●WR/Wheel Round Edge ●CR/CR Inlay Preparation Dia-Burs ●CD/Children's Dentistry Dia-Burs ●S/Short Shank ●SS/Super Short Shank ●C/Coarse ●F/Fine ●EF/Extra Fine
 
■High Quality Control : 
Laser measurement cutting test and strength test for each lot are performed. All products comply with our own standards which are far more strict than ISO standards.&nbsp;
 

Before using MANI DIA-BURS, please see the instruction as indicated below : ●For dental use only. ●Non-sterile. ●Insert the shank into the handpiece according to the instruction of the handpiece manufacturer.Insertion should be the full length.● Before use, run the instruments to make sure there is no descentering. If the instruments become bent, be sure to remove them from any further use. ●Please always use spray. A Plentiful water supply is necessary to maintain long-lived performance and also to prevent loading and pulpitis. ●Handle with care not to put excessive load. Pressure should be 20 to 50p for all instruments with diameter up to 023. ●Use below max. allowable r.p.m. of each instrument, see chart above, to avoid a possibility of being injured due to breakage.●Avoid levering, tilting, twisting and jamming motion. Do not work with a pulling motion. ●Wear a safety glasses and/or facemask to protect from being injured. ● Practicable for using auto-clave. Do not use high pressure steam sterilizer which heats more than 200℃ including drying process. ●After using, follow appropriate treatment as the medical waste.

Mani BR-41

<img src="https://dentacarts.com/images/companies/61/000%20official-site.jpg?1649435143781" alt="undefined" style="height: undefined;width: undefined"/>
C-Silicone Medium
140ml Medium
Made in Italy
Silaxil condensation silicones (type C), with the highest level of accuracy in details reproduction, are suitable for all impression taking techniques.
The purple color of the light body and the green color of the regular body allow to verify the perfect homogeneity of the mixing between base paste and catalyst, subsequently creating an excellent chromatic contrast between the first and second impression.
The viscosities facilitate manual mixing, making it free of any porosity; they also allow the registration of details without compressing the tissues, thus making it the ideal product for all impression taking techniques. The choice of delicate aromas, mint for Putty and orange for Light and Regular body, is well tolerated by the patient, does not alter the salivation and significantly reduces the emetic effect.
The long working time allows to perform the various stages of impression taking, without that the material pre-harden hastily.
The high dimensional stability over time allows to preserve the impression for long periods without incurring any dimensional alteration of the models.
Furthermore, thanks to the blocks mixture driven, the dosage and subsequent mixing phases of the Light Body / Regular Body with the Enersyl catalyst are extremely simplified, avoiding an unnecessary waste of material.
A color code makes each product easy to identify:
FIRST IMPRESSION:
⬤  Putty
SECOND IMPRESSION:
  Regular body
PACKAGING
 ● Regular body – 1 x 140 ml tube

Lascod Silaxil Medium Body 140ml

Sharp flute designs realize fast and smooth cutting performance and high durability.
<div class="product-main-info vs-product-main-info-responsive ty-product-block ty-product-detail et-product-main-info" style="-webkit-tap-highlight-color: rgba(0, 0, 0, 0); color: rgb(102, 102, 102); font-family: &quot;Open Sans&quot;, sans-serif; font-size: 13px; margin-bottom: 30px; position: relative; background-color: rgb(255, 255, 255);"></div>