TriGroup

egypt

Egypt

<img src="https://dentacarts.com/images/untitled%20folder/Trigroup%20Final21-1024x1024-1000x1000.jpg?1552388815445" alt="undefined" style="height: undefined;width: undefined"/>
Using The International Advanced Technology,Efficient Integrated Design,High Efficiency,Low Radiation. Using Microcomputer Intelligent Control,Not Only Remote Controlled Exposure,But More Powerful Function Of Low Voltage Alarm And High Voltage Protection. Micro Focus Technology,Much More Clear Image And Accurate Diagnosis. The Base Has Two Modes Of Mobile And Fixed ,Pneumatic Lift  Soat Ensures More Convenient For Dentist And More Comfortable For Patient. Can Use Lightroom Dental Film,Imaging In One Minute,Maximum Convenient Dentist To Diagnose. Can Connect To Dental Digital Imaging System,That Is Indispensable For Clinicians To Diagnose And Root Canal Filling.
Specifications
Power Supply:
220V±10%,50HZ,1KVA
Tube Voltage
60KV
Tube Current
8mA
Focus Size
0.8mm 
Total Filtration
2.5mmAL
Exposure Time
0.2-4s
Leak Radiation:
Outside One Meter≦0.002mGy/H，（National Standard:0.25mGy/H）
Package Size:
152*57*26(Cm)
Net Weight:
57kg
Precautions 1. In Order To Ensure Safety In Operation And Use, Good Ground Lead Must Be Installed Well. 2. Because Small X-Ray Machine’s Thermal Capacity Is Limited, Attention Should Be Paid To Making The Machine Work Intermittently. 3. Only During Exposure Process This Machine Will Produce X-Rays. It Won’t Produce X-Rays In Power-Off State, Neither In Power-On State As Long As Not In Exposure. 4. If Any Unforeseen Circumstances Occur During Correct Use, Operators Should Cut Off The Power Immediately And Stop Using The Machine. It Cannot Be Used Again Until It Is Overhauled And Qualified. 5. Before Leaving The Factory, Each X-Ray Device Is Equipped With An Additional Filter Plate With The Following Specifications: 1.0/0.5mm Aluminum Sheets. 6. Every Time When Disassembling The Machine, Disassemble The Head First And Then Other Parts. 8. Every Time After Using The Machine, Recover The Cross Arm To The Highest Point, And Then Place The Machine Head In An Equilibrium Position. 9. Every Time After Using, Sterilize And Clean Beam Tube End That Contacts The Patient With Medical Alcohol. 10. Clean The Machine Surface With A Dry Cloth Every Week And Inspect Whether The Connectors Contact Well. 11. Pay Attention To Machine Maintenance. Check Whether The Indicator Lights, Display, Rotary Knob, Switch, And Remote Control Work Normally; Whether The X-Ray Source Modules Leak Oil; Whether When X-Ray Source Modules Expose Produces Any Abnormal Noise; Or Whether Fixed Screws In The Mechanical Part Loose, And The Like. 13. The Rated Capacity Of The Machine Is 1.1kw. Please Select Power Supply Or Power Grid With A Power Supply Capacity Greater Than 1.5kw. If Network Voltage In This Region Is Abnormal, We Recommend Matching 1.5KW Or Higher Industrial Voltage Stabilizer, To Prevent Damage To The Machine And Reduced Machine Life Due To Abnormal Voltage.

Hainuo X-Ray JYF-10 D AC

Features:
Using the international advanced technology, efficient integrated design, high efficiency, low radiation.
Using microcomputer intelligent control, not only remote controlled exposure, but more powerful function of low voltage alarm and high voltage protection.
Micro focus technology, much more clear image and accurate diagnosis.
The base has two modes of mobile and fixed, pneumatic lift seat ensures more convenient for dentist and more comfortable for patient.
Can use light room dental film, imaging in one minute, maximum convenient dentist to diagnose.
Can connect to dental digital imaging system, that is indispensable for clinicians to diagnose and root canal filling.
 
Specifications:
Power supply: 110/220V, 60/50HZ, 1KVA
Tube voltage: 60KV
Tube current: 8mA
Focus size: 0.4mm
Total filtration: 2.5mmAL
Exposure time: 0.2-4s
Leak radiation: outside one meter≦0.002mGy/h (national standard:0.25mGy/h)
Mounting Type: Wall Mounted Design
Arm Sizes Available: Cross arm 535mm
Oblique arm 2 pcs 632.5 mm
Vertical arm 300 mm
Head length 350 mm
Length of Extension Cone: 2100mm
 
Precautions:
1. In order to ensure safety in operation and use, good ground lead must be installed well.
2. Because small X-ray machine’s thermal capacity is limited, attention should be paid to making the machine work intermittently.
3. Only during exposure process this machine will produce X-rays. It won’t produce X-rays in power-off state, neither in power-on state as long as not in exposure.
4. If any unforeseen circumstances occur during correct use, operators should cut off the power immediately and stop using the machine. It cannot be used again until it is overhauled and qualified.
5. Before leaving the factory, each X-ray device is equipped with an additional filter plate with the following specifications: 1.0/0.5mm aluminum sheets.
6. Every time when disassembling the machine, disassemble the head first and then other parts.
7. Every time after using the machine, recover the cross arm to the highest point, and then place the machine head in an equilibrium position.
8. Every time after using, sterilize and clean beam tube end that contacts the patient with medical alcohol.
9. Clean the machine surface with a dry cloth every week and inspect whether the connectors contact well.
10. Pay attention to machine maintenance. Check whether the indicator lights, display, rotary knob, switch, and remote control work normally; whether the X-ray source modules leak oil; whether when X-ray source modules expose produces any abnormal noise; or whether fixed screws in the mechanical part loose, and the like.
11. The rated capacity of the machine is 1.1kw. Please select power supply or power grid with a power supply capacity greater than 1.5kw. If network voltage in this region is abnormal, we recommend matching 1.5KW or higher industrial voltage stabilizer, to prevent damage to the machine and reduced machine life due to abnormal voltage.
 


<img src="https://dentacarts.com/images/untitled%20folder/Trigroup%20Final22-1024x1024-1000x1000.jpg?1552389610378" alt="undefined" style="height: undefined;width: undefined"/>
Standard Accessories:
1     operation manual and certification  1pc
2     Packing box  1pc
3     Arm components  1pc
4     Central controller  1pc
5     X-ray generator components  1pc
6     Accessories  1pc
6.1   Special spanner  1pc
6.2   Screwdriver(－) M5*75  1pc
6.3   Screwdriver(＋) M6*150  1pc
6.4   Fuse 5A  4pcs
6.5   Power wire/ground wire/exposure switch  1pc each
6.6   Swell screw bolts M10*80  4pcs
6.7   Wrench  1pc

Hainuo X-Ray JYF - 10 D High Frequency DC

to_fixed

Discount

Kandil

Profiles Woodpecker W3-Pro, set, 25 mm
 6 pcs \packaging 
W-0 (17/12)
W3-path (12 / vt)
W3-path (16 / vt)
W-1 (18/05)
W-2 (25/06)
W-3 (35/04)
<ul>
<li>Made of nickel-titanium alloy -</li>
<li>very flexible, -</li>
<li>low coefficient of metal "fatigue"</li>
<li>adaptation of the tool to the root canal shape</li>
<li>complete elimination of the formation of "steps"</li>
</ul>

Woodpecker Rotary Files W3-Pro

Denta Carts

Ultrasonic Scaler UDS P-Led by woodpecker is a multi-function scaler that works in three different modes i.e general, perio and endo with a feature of an automatic frequency tracking system which ensures that the machine always works on the best frequency and perform functions more steadily.The handpiece is detachable and can be autoclaved to the high temperature of 135℃ and the pressure of 0.22MPa.
<ul>
<li>Performs Multi-function: Scaling, perio and endo.</li>
<li>Optical handpiece, more convenient for clinical operation.</li>
<li>The handpiece is detachable and can be autoclaved to 135℃ and 0.22MPa.</li>
<li>The handpiece is cast from Titanium alloy to ensure sound mechanical function and durability.</li>
<li>The cable is made from silica gel tube which is soft and durable</li>
<li>The scaling tip is made of special material.The cavitation produced at the end of scaling tip helps in easy cleaning of the teeth.</li>
<li>It Eliminates dental calculus, bacterial plaque and tea stains on the teeth quickly without hurting the gum or the enamel.</li>
<li>Automatic frequency tracking ensures that the machine always works on the best frequency and performs functions more steadily.</li>
<li>Digitally controlled, easy operation and more efficient in scaling.</li>
<li>Compatible with EMS, you could connect your EMS handpiece with this control box, and you could also connect this Woodpecker UDS handpiece with EMS control box.</li>
<li>CE and FDA certificated. </li>
</ul>

Woodpecker UDS-A LED Ultrasonic Scaler

WOODPECKER i-LED Plus Curing Light from Woodpecker isergonomically designed to fit comfortably in the user’s hand. Using a constant power output this light has a cure time of 1 second for 2mm of resin, with a light intensity of up to 2300mw/ cm?.After the new upgrade, the wave band changes of iLED changes from a single blue light to blue-violet light which can cure all materials.
ADVANTAGES :-
Upgraded light intensity
<ul>
<li>Two modes for option:With the maximum light intensity of 2300mw/cm2,Curing 2mm resin in 1s,Which makes it especially suitable for orthodontic brackets, porcelain veneers and post core adhesives.</li>
</ul>
Upgraded focused light output
<ul>
<li>Unique woodpecker technology of focused light output reduces 55.87% light angle, allowing more concentrated energy and higher curing efficiency.</li>
</ul>
Upgraded wide spectrum
<ul>
<li>The emission wavelength range of iLED plus wide spectrum, curing light is 385nm-515nm, mainly adding the wave band of 385nm-420nm.the additional band can better curing the resin materials containing new- style photo initiators such as TPO.For example, restoration materials such as Tetric N-ceram bulk fill (Ivoclar) &amp; Amelogen plus (Ultradent).The additional wave band can also reduce the risk of resin shedding and incomplete curing.</li>
</ul>
Features :-
<ul>
<li>Constant power output- born for teeth restoration</li>
<li>360 Degree curing- reach every angle</li>
<li>Fluid design- better hand feeling</li>
<li>1 sec for curing- 2mm resin</li>
<li>Wide spectrum</li>
<li>High light intensity</li>
<li>Focused light</li>
</ul>
TECHNICAL SPECIFICATIONS :-
<ul>
<li>Dimensions: 25mm?25mm?240mm</li>
<li>Net weight: 278g</li>
<li>Power Input: 100V to 240V, 50Hz/60 Hz</li>
<li>Wave length: 385nm-515nm</li>
<li>Light intensity: 1000 mW/cm2~2500mW/cm2</li>
</ul>
PRECAUTIONS :-
<ul>
<li>Please recharge the battery at least 4 hours before first time usage.</li>
<li>In order to prevent cross-infection, it is forbidden to reuse the disposable sleeve.</li>
<li>The top of the main unit can be turned 360 degrees to both left and right while it is forbidden to remove.</li>
<li>During operation, the blue light should be aimed straightly at the composite resin to ensure the effect of solidification.</li>
<li>Avoid aiming the blue light at eyes directly.</li>
<li>Please use the power adapter and lithium battery which is designed and supplied by our company. It may cause potential dangers to operator and patient by using the power adapter and lithium battery which is designed and supplied by other manufacturers.</li>
<li>It is forbidden to use metal or other conductors to touch the main unit and the charging point of pedestal because it may burn the internal circuit or make the lithium battery short circuit.</li>
<li>Please recharge the battery in cool and ventilated room.</li>
<li>It is forbidden to self-taking apart the battery, in order not to result in short-circuit or leakage.</li>
<li>It is forbidden to extrude, shake or rock the battery. The Li-ion battery is forbidden to be in short-circuit situation and it is forbidden to put the</li>
</ul>
MAINTENANCE:-
<ul>
<li>This equipment does not include the self-maintainable spare parts. The maintenance of this equipment should be taken by the appointed professional or special repair shop.</li>
<li>Users can change the disposable sleeve and lithium battery. Please use accessory which is designed and supplied by our company, contract with the local dealer or our company if you want to buy. It may cause potential dangers to curing light or other damages which is designed and supplied by other manufacturers.</li>
<li>The accessory of the product should be cleaned by clean water or neutral sterilized liquid. Do not soak. Do not use highly volatile and diffluent solvent to clean this equipment, which can cause the signs on the control panel to fade.</li>
<li>Please clean the resin remained on the top of the main unit after using to avoid infecting the life-span or solidified effect.</li>
<li>The device cannot be maintanenced during operation. And it is suggested to maintain it once a month. But sleeve is for one-time usage and no need for maintanance.</li>
</ul>
Packaging :-
<ul>
<li>1 x Light cure unit</li>
<li>1 x Charger</li>
<li>1 x Charger cord</li>
<li>1 x Instruction manual </li>
</ul>

Super capacity Li-ion battery, full charge can be used more than 400 times under 10s working time mode. wavelength (420nm~480nm) , 1 second for 2mm in, intensity up to 2300mw/ cm².shop now from DC

Woodpecker Light Cure I Led

The-Dental-Store-TDS

E-CONNECT S Endo motor with built-in apex locator
Brushless Endomotor with root canal measurement capability. It can be used as an endomotor for preparation and enlargement of root canals, or device for measuring canal length. It can be used to enlarge the canals while monitoring the position of the file tip inside the canal.
Features: • Brushless motor • Cordless handle   • Reciprocating mode with adjustable speed and adjustable angles from 30° to 370° • Continuous Rotation – Speed 120 to 1000 rpm   • Pre-settings of almost all file systems, both rotary and reciprocating. Can be customized by the user • Built-in Apex Locator: integrate with motor function or use as standalone apex locator • Torque Calibration • Ambidextrous Display - Screen can be rotated for left or right-hand use
• Auto Start and Stop - Motor starts moving when the file enters inside the root canal, and stops when withdrawn • Apical Reverse: When the file reaches pre-set apical reverse point, user can define whether the file starts moving in reverse direction • Apical Slow Down: to preserve the cemento-dentinal junction and avoid file separation, speed of motor slows down when the file is in apical region • OLED screen  • Powerful Li-ion battery
Different working modes:      CW: Clockwise Continuous Rotation     CCW: Counter Clockwise Continuous Rotation     REC: Reciprocation Movement     ATC: Adaptive Torque Control 
Technical:
Rotational Speed Range: 120-1000rpm Torque Range:   0.5-4.0Ncm Memory Programs:   11（M0-M10） Battery Capacity:   1500mAh

Eighteeth E CONNECT S ENDODONTIC MOTOR WITH INTEGRATED APEX LOCATOR

E-CONNECT S ENDODONTIC MOTOR WITH INTEGRATED APEX LOCATOR

Cordless Endomotor Built-in Apex Locator Miniature Head : Provides excellent visibility while working Lithium Battery 
<div class="section" style="padding-bottom: 2px; width: 513.875px; float: left; color: rgb(79, 79, 79); font-family: &quot;Open Sans&quot;, &quot;Helvetica Neue&quot;, Helvetica, Arial, sans-serif; font-size: 12px; background-color: rgb(255, 255, 255);"><div class="left" style="overflow-wrap: break-word; float: left; padding: 2px 10px 2px 0px; color: rgb(0, 0, 0); width: 513.875px; white-space: nowrap; font-size: 12px;"> </div><div class="clear" style="width: 513.875px;"></div></div>

<h2>Features:</h2>
 - Compact size and stable design allow for excellent flexibility during procedures. - Based on advanced multiple frequency network impedance measurement technology and automatic calibrating ensures the measurements are accurate. - OLED display, brighter and cleaner surface. Parameter: - Model: E-PEX Pro - Adaptor working voltage: AC100-240v, 50/60Hz - Screen: 3.5" LCD - Dimensions: 95mm × 65mm × 20mm - Battery capacity: 1600mAh When Connection with endo motor will activate following functions: 1. Auto Start &amp; Stop: Auto start motor when reach the canal and auto stop when leave the canal. 2. Apical Reverse or Stop: Auto reverse or stop when approach the apical 3. Apical Slow Down: Auto slow down when close to the apical 4. Apical Torque Reduction: Auto reduce torque when close to the apical

Eighteeth E-PEX Pro Apex Locator

Eighteeh E-PEX Pro (Apex Locator)

Parameter: - Model: E-PEX Pro - Adaptor working voltage: AC100-240v, 50/60Hz - Screen: 3.5" LCD - Dimensions: 95mm × 65mm × 20mm - Battery capacity: 1600mA

Features: - Continuous mode: Rotation speed, torque and direction can be programmed to 6 settings. - Auto torque reverse, reduce the possibility of file broken in tooth. - Reciprocating mode: 5 modes of reciprocating cutting make operation safe and effective. - More advanced functions: Right &amp; Left hand converting, Self-calibration, volume adjustment etc. - 340° adjustable miniature head provide excellent visibility - Original import motor with low noise and long life. Parameter: - Model Number: E-CONNECT Pro - Adaptor working voltage: AC100-240v,50/60Hz - Rotational speed range: 120-650 rpm - Torque range: 0.5-4.0N.cm - Battery capacity: 1600mAh When Connection with endo motor will activate following functions: 1. Auto Start &amp; Stop: Auto start motor when reach the canal and auto stop when leave the canal. 2. Apical Reverse or Stop: Auto reverse or stop when approach the apical 3. Apical Slow Down: Auto slow down when close to the apical 4. Apical Torque Reduction: Auto reduce torque when close to the apical 
Working with The Apex Locator: E PEX Pro (Item Code: EPEXP)

Eighteeth E CONNECT Pro Endo Motor

Eighteeth E-CONNECT Pro (Endo Motor)

Parameter: 
- Model Number: E-CONNECT Pro - Adaptor working voltage: AC100-240v,50/60Hz - Rotational speed range: 120-650 rpm - Torque range: 0.5-4.0N.cm - Battery capacity: 1600mAh

<img src="https://d1x0v0tfzzbggv.cloudfront.net/images/transcanii 1.PNG 22.PNG?1586126149866" alt="undefined" style="height: undefined;width: undefined"/>
Nexobio Transcen Temp C&amp;B LC 15g x 3 Packs Light Cured Temporary Crown and Bridge Resin Transcen Temp C&amp;B LC is new light cured single component, sculptable composite resin for temporary inlays, onlays, crowns, veneers and bridges. Each Transcen Temp C&amp;B LC putty stick contains enough material to fabricate approximately 60 average size crowns.
 
Indication
<ul>
<li>Temporary Crown and Bridge</li>
</ul>
 Benefits
<ul>
<li>No Methyl methacryalte (MMA Free) </li>
<li>Single component light cured temporary resin</li>
<li>Scluptable ideal consistency and none stocky</li>
<li>Low shrinkage</li>
<li>Delivered as stick</li>
<li>Strong and Durable</li>
</ul>
 Package
<ul>
<li>1 Pack (15g x 3)  <img src="https://d1x0v0tfzzbggv.cloudfront.net/images/transcanii 1.PNG?1586126131712" alt="undefined" style="height: undefined;width: undefined"/></li>
</ul>

Nexobio Transcen Temp C and B LC A2 A2 A3

Standard specifications:
<ul>
<li>Low –mounted instrument tray                                           1 Set</li>
<li>4 hole headpiece tubing                                                     3 Set </li>
<li>Dental chair pu leather</li>
<li>Safety stop</li>
<li>Removable Glass spittoon                                                   1 Set</li>
<li>Operating led light with sensor                                           1 Set</li>
<li>24 v x-ray film viewer                                                         1 Set</li>
<li>High and low saliva ejector                                                 1 Set</li>
<li>3 way syringe                                                                      2 Set</li>
<li>Foot control( with self –lock function)                                 1 Set</li>
<li>Water tank                                                                         1 Set</li>
<li>Bulit out junction box                                                         1 Set</li>
<li>Water and air tubes made in USA</li>
<li>Water heater                                                                       1 Set</li>
<li>Glass shelf                                                                           1 Set</li>
<li>Adjustable head rest</li>
<li>Motor chair control system with 3 memory programs            1 Set</li>
<li>Auto spitton flush and cup filler control system</li>
<li>Synchronization movement</li>
</ul>
Technical specifications : 
<ul>
<li>Power voltage :220v /50 hz</li>
<li>Motor voltage :24 v</li>
<li>Water pressure :0.2mpa0.4-mpa</li>
<li>Air pressure :0.5mpa0.8-mpa</li>
</ul>
Warranty 3 years

RN A5 Dental Unit

Standard specifications:
<ul>
<li>Low –mounted instrument tray                                                           1 Set </li>
<li>4-hole headpiece tubing                                                                    3 Set</li>
<li>Removable instrument tray                                                                1 Set</li>
<li>Dental chair pu leather                                                                      </li>
<li>Safety stop</li>
<li>Removable Glass spittoon                                                                  1 Set</li>
<li>Tunable high –grade led light with senor                                            1 Set</li>
<li>24 v x-ray film viewer                                                                       1 Set</li>
<li>High and low saliva ejector                                                               1 Set </li>
<li>3-way syringe                                                                                   2 Set </li>
<li>Multifunction Foot control ( with self –lock function)                         1 Set </li>
<li>Water tank                                                                                       1 Set</li>
<li>Bulit out junction box                                                                       1 Set</li>
<li>Water and air tubes made in USA              </li>
<li>Water heater                                                                                    1 Set</li>
<li>Adjustable head rest                                                                         1 Set</li>
<li>Auto spitton flush and cup filler control system </li>
<li>Panoramic x-ray viewer  </li>
<li>Synchronization movement                                                              1 Set</li>
<li>9 memory programs</li>
</ul>
Technical specifications :
<ul>
<li>Power voltage :220v /50 hz </li>
<li>Motor voltage :24 v</li>
<li>Water pressure :0.2mpa-0.4mpa</li>
<li>Air pressure :0.5mpa-0.8mpa</li>
</ul>
Warranty 3 years

RN B2 Dental Unit

Standard specifications: 
<ul>
<li>Low –mounted instrument tray                                                                                         1 Set</li>
<li>-4hole headpiece tubing                                                                                                  3 Set</li>
<li>Dental chair pu leather </li>
<li>Safetya stop                                                                                                                    1 Set</li>
<li>Removable Glass spittoon                                                                                                1 Set</li>
<li>Tunable high –grade led light with senor                                                                           1 Set</li>
<li>24 v x-ray film viewer                                                                                                     1 Set</li>
<li>High and low saliva ejector                                                                                              2 Set</li>
<li>-3way syringe                                                                                                                 1 Set</li>
<li>Multifunction Foot control ( with self –lock function)                                                       1 Set</li>
<li>Water tank                                                                                                                     1 Set</li>
<li>Bulit out junction box</li>
<li>Water and air tubes made in USA</li>
<li>Water heater</li>
<li>Adjustable head rest                                                                                                      1 Set</li>
<li>9 memory programs</li>
<li>memory programs                                                                                                          1 Set</li>
<li>Auto spitton flush and cup filler control system</li>
<li>Synchronization movement                                                                                            1 Set</li>
</ul>
Technical specifications :
<ul>
<li>Power voltage :220v /50 hz</li>
<li>Motor voltage :24 v </li>
<li>Water pressure :0.2mpa0.4-mpa</li>
<li>Air pressure :0.5mpa0.8-mpa</li>
</ul>
Warranty 3 years