Norton clear resin is suitable for dental implant surgery, high precision property helps dentist during the process, and it can be sterilized by disinfectant or even by sterilizer.

Printing parameter ELA series are perfectly on most brand LCD printer, and fast printing on DLPs.

For LCD printer, bottom layer 20-70s and each layer exposure time 4-20s, for example, layer thickness 50 micron on Anycubic printer, base 35s while each layer 18s.

For DLP printer, bottom 5-15s and each layer 3-8s.

The exposure time should be adjusted according to printer light energy, layer thickness and model structure.

Various precautions regarding the resin:

1. Storage environment: Store in cool and dry place, and avoid sunlight, recommended temperature at 25-30 degrees Celsius.

2. Preparation before use: Shake the resin well and leave it for 30 minutes before use. Allow to stand for 30 minutes to eliminate air bubbles that generated during the shaking process.

3. Environmental conditions during use: The ambient temperature is recommended to be controlled at 25-30 degrees Celsius, and during the printing should avoid daylight.