Prime&Bond universal provides well balanced hydrophobic and hydrophilic properties to ensure complete coverage and penetration at varying moisture levels. So even if dentin is overly wet or dry, you get a reliable bond that actively guards against the leading causes of adhesive failure.

Prime&Bond universal provides:

• Versatility for use with all etching methods, all indications
• Reliable performance on over-wet and over-dried dentin
• Virtually no post-operative sensitivity
• Low film thickness for a reduced risk of pooling and misfit of the restoration
• A relaxed working time and reduced waste, remaining usable for 30 minutes in a closed CliXdish
• High initial bond strength with Calibra Ceram cement for indirect restorations
• A patented formulation free of HEMA, TEGDMA, or bisphenol

Indications:

• Direct, light-cured composite and compomer restorations.
• Composite, ceramic and amalgam repairs.
• Cavity varnish for use with fresh amalgam.
• Indirect restorations cemented with Calibra Universal and Calibra Ceram.

In combination with Dentsply Sirona Self Cure Activator:

1. Indirect restorations cemented with dual-cure/self-cure resin cements.
2. Direct dual-cure/self-cure composite restorations and core build up.

Benefits

1. Active moisture control
2. Reliable bonding performance, no matter if the dentin is still too wet or already too dry for virtually no post-operative sensitivity.
3. Active cavity spreading
4. Actively spreads in the cavity and helps to cover all cavity surfaces.
5. Self levelling
6. The adhesives self-levels to form a smooth and uniform adhesive layer, helping to avoid dry spots or adhesive pooling.
7. Low film thickness
8. Adhesive pools can show up as translucent areas on a radiograph, which can easily be misdiagnosed as a void. Thick adhesives may also change crown prep geometry impacting crown fit.