Optimum contouring properties, will not slump. Available in 5 different transparent colors to allow the thickness to be checked and to contract well within the wax. When used with the Pi-Ku-Plast separating agent, resin inner copings can be base for producing milled restorations. Ideal for connecting bar sections for soldering.

 Due to the multigrain design, Pi-Ku-Plast absorbs less monomer and therefore has less shrinkage. Various grain sizes shift into the gaps of each other for a compact, sturdy application. The burnout is clean and complete. In burnout, Pi-Ku-Plast does not expand but collapses. This puts no internal stress in the casting ring, resulting in a clean, stress-free casting.

Pikuplast Dip System:
  Control viscosity, Save material, Save time, Save money

Wet the brush with the Pi-Ku-Plast monomer. The amount and firmness of the portion can be controlled by the amount of monomer on the brush and the time it is immersed in the polymer. Because the material does not have to be pre-mixed, no resin is wasted due to over mixing the two components. After using, the brush is cleaned in the cleaner and the vessels are covered to keep the Pi-Ku-Plast in good working condition.

•  Dip the flat side of the brush into the polymer to take up large portions.
•  Dip the narrow side of the brush into the polymer to take up small portions.
•  Dip only the brush tip into the polymer to take up very small portions.

*The Pi-Ku-Plast Assortment Kit Includes the following items

100 ml Monomer
100 ml Cleaner
85 g Polymer
1 Brush size A 1 Brush size B
1 Brush holder
3 Vessels