3D Pro multilayer restorations have better aesthetic performance, as their excellent translucent properties, it is becoming the first choice today in the cases with high aesthetic requirements.

Indications:

Restorations are available with monolithic full contour crowns, bridges, veneers or full arch.

• Bridges on implants
• Inlay
• 3-4 unit bridges
• Onlay
• Crowns (anterior and posterior)
• Veneer
• Long-span and curved bridges
• Primary crowns
• Full arch bridges

Features of 3D Pro Multilayer

3D Pro multilayer has been introduced into dental practice as an alternative to metal-ceramic dental restorations. Compared to the traditional porcelain to metal restorations

Consistent VITA® Classic Shade Match

Strictly follow up VITA® Classic Shade from the R & D phase and also by the standard production with shade match.

Glazed with Bloomden CeramStar® Glaze/Stain Kit

Preparation: 3D Pro 3-unit bridge after milled and sintered and then glazed.

Developed an improved flexural strength

The flexural strength of this new material is 650-1100 MPa. These conveniences have made the 3D Pro multilayer zirconia used more and more for crowns and bridges inlateral applications.

Excellent aesthetics performance

Translucency can be regulated by controlling the absorption, reflection, and transmission of light through the material. The translucency is higher when the reluctance is low and the transmission is high.

Compared to previous stage the strength as a trend

Bloomzir® 3D Pro multilayer zirconia is unlike any other zirconia, it can exhibit a strength range from 650MPa to 1100MPa which can cover posteriors and anteriors for both crowns and bridges including implant restorations.

Monoclinic resistance

Unique hydrolysis microstructure and chemical formulation by the hydrothermal treatment also resist degradation of aging which the cubic shifted to monoclinic state that can be observed in zirconia structure.

High speed sintering cycle

An excellent attributes is the fast sintering cycle which can ensure the strength, translucency and aging resistance simultaneously. The high-productivity sintering cycle allows for “inside furnace” time in 45 minutes.

Low Wear Rate

The average crystalline size of less than 0.5 μm and the Hydrolyzed powder properties are organized inside 3D Pro multilayer zirconia which enable 3D Pro multilayer zirconia to be long-term enamel wear behavior closed to the natural human teeth after several times of lab-test.