restorative_1

Misr Sinai For Supplies

egypt

Egypt

Specifications:
1- High power led light 1200 mw/cm2 for fast cures.

2- Emits light in the most relevant spectrum of 430-480 nm wavelength to efficiently solidify any brand of resins.

3- Three working modes and ability to set exposure times for any clinical protocol (5, 10, 15, 20) seconds.

4- Super-compact, lightweight and cordless for the ultimate in convenience.
5- Cool and silence.

6- Li-ion battery with super capacity and no memory effect.
7- Digital display of working time and sound signal.
8- Can work for 120 sec continually.
9-Can also be operated with the cord attached for back-up in case of low battery charge.

10- Large eye shield and over light.

JOHNSON - PROMIDENT | Light Cure

to_fixed

Discount

Kandil

<h1>Woodpecker Light Cure Unit LED-D</h1>
FEATURES :-
 
<ul>
<li>Wireless. The battery can be replaced.</li>
<li>Three working modes: Full, Ramping, Pulse.</li>
<li>Time setting: 5s 10s 15s 20s 25s 30s 35s 40s.</li>
<li>Automatic memory.</li>
<li>A full charge can be used for over 200 times (10 s/time).</li>
<li>Constant light intensity, the solidification effect is stable even the battery power decrease.</li>
<li>with wire or wireless. Even the battery runs out, it can work by connecting power supply with wire.</li>
</ul>
SPECIFICATIONS :-
 
<ul>
<li>Power input AC 100V-240V 50/60 Hz </li>
<li>Net weight: 143g </li>
<li>Light output 650-850mW/cm2 </li>
<li>Dimensions: 32*37*264mm </li>
</ul>

Woodpecker LED D Lightcure

<h5>Features:</h5>
<ul>
<li>Wireless</li>
<li>Light meter attached</li>
<li>Built in fan to avoid over-heat</li>
<li>OLED screen. All angles visible</li>
<li>Especially suitable to solidify agglomerant of orthodontic bracket, veneer and post</li>
</ul>
<h5>Technical Information:</h5>
<ul>
<li>Power voltage: AC100-240 V/50-60Hz</li>
<li>Light power: 1600-1800mW/cm²</li>
<li>Weight: 210g</li>
<li>Dimensions: 195*40*150mm</li>
</ul>

Woodpecker Light Curing LED F

Woodpecker Light Curing RTA: 1000-1200 Watt - The Solidification Effect Is Not Affected By The Consumption Of Remaining Power .- Special Light Hood And Holder Design With High Efficiency In Filtering Light. - Ergonomic Design , Small And Convinient.

Woodpecker RTA Curing Light

WOODPECKER i-LED Plus Curing Light from Woodpecker isergonomically designed to fit comfortably in the user’s hand. Using a constant power output this light has a cure time of 1 second for 2mm of resin, with a light intensity of up to 2300mw/ cm?.After the new upgrade, the wave band changes of iLED changes from a single blue light to blue-violet light which can cure all materials.
ADVANTAGES :-
Upgraded light intensity
<ul>
<li>Two modes for option:With the maximum light intensity of 2300mw/cm2,Curing 2mm resin in 1s,Which makes it especially suitable for orthodontic brackets, porcelain veneers and post core adhesives.</li>
</ul>
Upgraded focused light output
<ul>
<li>Unique woodpecker technology of focused light output reduces 55.87% light angle, allowing more concentrated energy and higher curing efficiency.</li>
</ul>
Upgraded wide spectrum
<ul>
<li>The emission wavelength range of iLED plus wide spectrum, curing light is 385nm-515nm, mainly adding the wave band of 385nm-420nm.the additional band can better curing the resin materials containing new- style photo initiators such as TPO.For example, restoration materials such as Tetric N-ceram bulk fill (Ivoclar) &amp; Amelogen plus (Ultradent).The additional wave band can also reduce the risk of resin shedding and incomplete curing.</li>
</ul>
Features :-
<ul>
<li>Constant power output- born for teeth restoration</li>
<li>360 Degree curing- reach every angle</li>
<li>Fluid design- better hand feeling</li>
<li>1 sec for curing- 2mm resin</li>
<li>Wide spectrum</li>
<li>High light intensity</li>
<li>Focused light</li>
</ul>
TECHNICAL SPECIFICATIONS :-
<ul>
<li>Dimensions: 25mm?25mm?240mm</li>
<li>Net weight: 278g</li>
<li>Power Input: 100V to 240V, 50Hz/60 Hz</li>
<li>Wave length: 385nm-515nm</li>
<li>Light intensity: 1000 mW/cm2~2500mW/cm2</li>
</ul>
PRECAUTIONS :-
<ul>
<li>Please recharge the battery at least 4 hours before first time usage.</li>
<li>In order to prevent cross-infection, it is forbidden to reuse the disposable sleeve.</li>
<li>The top of the main unit can be turned 360 degrees to both left and right while it is forbidden to remove.</li>
<li>During operation, the blue light should be aimed straightly at the composite resin to ensure the effect of solidification.</li>
<li>Avoid aiming the blue light at eyes directly.</li>
<li>Please use the power adapter and lithium battery which is designed and supplied by our company. It may cause potential dangers to operator and patient by using the power adapter and lithium battery which is designed and supplied by other manufacturers.</li>
<li>It is forbidden to use metal or other conductors to touch the main unit and the charging point of pedestal because it may burn the internal circuit or make the lithium battery short circuit.</li>
<li>Please recharge the battery in cool and ventilated room.</li>
<li>It is forbidden to self-taking apart the battery, in order not to result in short-circuit or leakage.</li>
<li>It is forbidden to extrude, shake or rock the battery. The Li-ion battery is forbidden to be in short-circuit situation and it is forbidden to put the</li>
</ul>
MAINTENANCE:-
<ul>
<li>This equipment does not include the self-maintainable spare parts. The maintenance of this equipment should be taken by the appointed professional or special repair shop.</li>
<li>Users can change the disposable sleeve and lithium battery. Please use accessory which is designed and supplied by our company, contract with the local dealer or our company if you want to buy. It may cause potential dangers to curing light or other damages which is designed and supplied by other manufacturers.</li>
<li>The accessory of the product should be cleaned by clean water or neutral sterilized liquid. Do not soak. Do not use highly volatile and diffluent solvent to clean this equipment, which can cause the signs on the control panel to fade.</li>
<li>Please clean the resin remained on the top of the main unit after using to avoid infecting the life-span or solidified effect.</li>
<li>The device cannot be maintanenced during operation. And it is suggested to maintain it once a month. But sleeve is for one-time usage and no need for maintanance.</li>
</ul>
Packaging :-
<ul>
<li>1 x Light cure unit</li>
<li>1 x Charger</li>
<li>1 x Charger cord</li>
<li>1 x Instruction manual </li>
</ul>

Super capacity Li-ion battery, full charge can be used more than 400 times under 10s working time mode. wavelength (420nm~480nm) , 1 second for 2mm in, intensity up to 2300mw/ cm².shop now from DC

Woodpecker Light Cure I Led

Denta Carts

Features:
<ul>
<li>Smart controlling chip</li>
<li>keeps light output consistent</li>
<li>Light intensity:</li>
<li>1000mw/cm 2 , 1500mw/cm 2 , 2300mw/cm 2</li>
<li>600 mw/cm ²(detect mode)</li>
<li>Wavelength:385-515nm</li>
<li>3 Blue, 1 Violet, 10w LED</li>
<li>360° rotatable head</li>
<li>Intensity digital display</li>
<li>Multiple Curing Options:</li>
<li>   Ramp mode</li>
<li>   Pulse mode</li>
<li>Caries detection</li>
</ul>
Technical parameter: Curing Pen 4 LEDs curing light Dimension: 24*21*230(mm) Net Weight: 109g Lens size: 11mm Power supply: &gt;1200 times, 3 Sec Maximum light intensity

Eighteeth Curing Pen

Technical Data:
<ul>
<li>Adapter：AC100~240V，DC5V/1.5A，50/60Hz</li>
<li>Curing mode:</li>
<li>Wavelength: 380~520nm;</li>
<li>Curing time: 10s, 20s;</li>
<li>Curing depth: 8mm;</li>
<li>Curing range: 10mm;</li>
<li>Light power:≥1100mw/cm²</li>
</ul>
 
Detection mode:
<ul>
<li>Wavelength: 380~420nm</li>
<li>Light intensity: 40~280mw/cm</li>
</ul>
DB686 Nano
●The full metal body;
●Small and exquisite, only 13.5mm outside diameter;
●Indicator light and control key, two in one;
●Head can rotate 360°;
●4 wick, wide spectrum:380-520mm, suitable for most of UV curing resins;
●Independent caries detection LED light core, leaving no place for caries to hide;
●Built-in high sensitive LED metering system;
●10mm wide curing range;
●8mm curing depth；
●Two batteries as standard, a fully charged battery can be used 200 times(10s curing mode)

COXO DB 686 Nano Light Cure and Caries Detector DB Nano

<h1>Woodpecker iLED Max Light Cure</h1>
The woodpecker iLED MAX. More-focused light output.
Upgraded focused light output Unique Woodpecker technology of focused light output reduces 55.87% light angle, allowing more concentrated energy and higher curing efficiency.
Upgraded light intensity Two modes for options; with the maximum light intensity of 2300mw/cm², curing 2 mm resin in 1s, which makes it especially suitable for orthodontic brackets, porcelain veneers and post-core adhesives.
Upgraded wide spectrum The emissions wavelength range of iLED Max Wide Spectrum Curing Light is 385mm-420nm. The additional band can better curing the resin materials containing new-style photoinitiators such as TPO. For example, restoration materials such as Tetric N-Ceram Bulk Fill (Ivoclar), Amelogen Plus (Ultradent), and ENA Hn(Micerium). The additional wave band can also reduce the risk of resin shedding and incomplete curing.
Using a constant power output this light has two program settings:
<ul>
<li>P1 - Turbo Mode - Light intensity 2300 - 2500 mw/cm2 for 1 - 3 second cures.</li>
<li>P2 - Normal Mode - Light intensity 1000 - 1200mw/cm2 for 5 - 20 second cures.</li>
<li>With the Turbo mode the light has a cure time of 1 second for 2mm of resin, with light intensity of up to 2300mw/ cm²</li>
</ul>
It also features:
<ul>
<li>a 360° fully rotatable head, disposable covers and a rechargeable lithium battery.</li>
<li>Constant Power Output</li>
<li>360° Curing</li>
<li>Fluid Design</li>
<li>1 sec. for Curing</li>
</ul>
Technical specifications:
<ul>
<li>Dimensions: 25mm×25mm×240mm</li>
<li>Net weight: 278g</li>
<li>Power Input: 100V to 240V, 50Hz/60 Hz</li>
<li>Wave length: 385nm-515nm</li>
<li>Light intensity: 1000 mW/cm2~2500mW/cm2</li>
</ul>

Woodpecker iLED Max Light Cure

Professional Curing Lamp. 
The Set, which is meant for built-in application, has got the following features:
<ul>
<li>SIX curing programs</li>
<li>High-power LED light</li>
<li>Straight or Pistol position</li>
<li>Grey or brown supply silicone Hose.</li>
</ul>
Lamp comes with a @8mm optical fibre and 2-year guarantee.
A @5mm optical fibre is also available for higher output power.
AVAILABLE VERSIONS:
<ul>
<li>With grey silicone hose (REF 502.93)</li>
<li>With brown silicone hose (REF 502.97)</li>
</ul>
Technical Sheet :
<ul>
<li>Sterilization Optical fiber and Shield can be sterilized in an autoclave at 134 °C/2 bar (275 °F/29 psi).</li>
<li>Compliance CEI EN 60601-1, CEI EN 62471</li>
<li>Weight 120 g</li>
<li>Supply Voltage 20 ÷ 36 Vdc; 24 Vac</li>
</ul>

TKD MOON EVOLUTION Italy Light Cure Built in

Features: ✔ Lightning fast, curing in one second. ✔ Choose between two modes. Super mode: 1 second curing, 3 seconds curing; Progressive mode: 5 seconds, 10 seconds, 15 seconds, 20 seconds ✔ 360 ° rotating irradiation is meticulous. ✔ The high end makes the light source specially designed for tooth restoration. ✔ Constant optical power output, without affecting the curing effect due to the decrease of battery power.
Technical Specification:
Light power 5W
Wavelength 430-485nm
Light intensity 1200mW/cm2-1600mW/cm2
Battery Li-on
Battery capacity 1100mAh
Input voltage AC100-240V, 50/60Hz 0.4A Max
Output voltage DC 5V/1.5A
Net Weight 190g
Material stainless steel
Dimensions 22x15.5x9cm

Cicada One Second Curing Light Cure Plastic

-  Ultra Power Mode: 3000mw/cm2 
- Broad spectrum wavelength : ranges from 380nm - 515nm.
- 360 rotatable , small light head: Easy to access to posterior molars which offers better patient’s experience.
- Special lens design : Unique lens design forms a concentrated beam for uniform curing. 
5 working modes: 
P1: 
normal mode 
Light Intensity: 1200mw/cm2.
Time Setting:5s, 10s, 15s, 20s, 25s,30s,35s,40s.
P2: 
High mode
Light Intensity: 2000mw/cm2.
Time Setting: 1s, 3s, 5s, 10s. 
P3: 
Ultra mode 
Light Intensity:3000mw/cm2
Time Setting: 1s, 3s, 5s.
P4:
Pluse mode
Light Intensity: 1200mw/cm2
Time Setting:5s, 10s, 15s, 20s.
P5:
Ramp mode
( Reduces Composite Micro-cracking ) 
Light Intensity: 1200mw/cm2
Time Setting:5s, 10s, 15s, 20s.

Eighteeth Curing Pen-E 1 sec

<ul>
<li>Cure 2mm  in one second, go quicker than ever.</li>
<li>360 degree rotary head, extend the possibility.</li>
<li>Upgraded Light Intensity. Three modes for option, with the maximum light intensity of 3000mw/cm2.</li>
<li>Upgraded Wide Spectrum. The wave band  changes from a single blue light to blue-violet light which can cure all materials.</li>
<li>Upgraded Focused Light Output. Unique Woodpecker technology of focused light output reduces 55.87% light angle, allowing more concentrated energy and higher curing efficiency.</li>
<li>Magnetic Point Cure Lens. Provides pinpoint curing of small composites and is helpful for tack curing veneers and all porcelain crown.</li>
<li>Large Capacity Battery: A full charge can be used for more than 400 times continuously under 10s working time mode. Woodpecker rechargeable lithium battery had received CB certification. The batteries refuse explosion.</li>
<li>Especially suitable for orthodontic brackets, porcelain veneers and post-core adhesives.</li>
<li>Turbo Power Mode: screen shows P0, press the time button to select of time which could be 1 and 3 seconds. Its output light intensity is about 2700-3000 mW/cm2.</li>
<li>High Power Mode: screen shows P1, press the time button to select of time which could be 3 and 5 seconds. Its output light intensity is about 1800-2000 mW/cm2.</li>
<li>Standard Power Mode: screen shows P2, press the time button to select of time which could be 5, 10 ,15 and 20 seconds. Its output light intensity is about 1000-1200 mW/cm2.</li>
<li>Power input: 100V to 240V, 50Hz/60 Hz</li>
<li>Power output: DC5V/1A</li>
<li>Battery: 18500, 3.7V/ 2000mAh</li>
<li>Wave length: 385nm-515nm</li>
<li>Light intensity: 1000 -3000mW/cm2</li>
<li>Illumination range: 8mm-10mm</li>
<li>Dimension: 1”×1”×9.5” (25×25×240mm)</li>
<li>Net weight: 0.6lb (278g)</li>
<li>Package: 1pc/box </li>
</ul>